i just started on working with an i.MX6 Sabre AI platform and want to work bare metal.
Is there anybody who knows the configuration and scripts needed to execute to get DS-5 connected to the board to load the application?
Your load address (0x8000) seems me suspicious :
"Failed to write 5.068 bytes to address S:0x00008000"
i.MX6 has following address ranges for applications (Table 2-1. System memory map of the Reference Manual) :
0090_0000 - 0093_FFFF internal RAM (OCRAM), useful for small applications, since there is no need for DRAM init.
1000_0000 - FFFF_FFFF DRAM
So, please try to rebuild the application using correct link file, or just correct application memory map.
Please use scripts from the Platform SDK.
thanks for that fast reply!
I already tried to use those scripts, and it looks like i get connected to the target. But when trying to load the application i get the following messages in the debug window:
Stopping running target Freescale - i.MX6 Quad (Generic) on USB:001567 on connection
Connected to running target Freescale - i.MX6 Quad (Generic) on USB:001567
Execution stopped at: S:0x00000FC4
S:0x00000FC4 BX lr
! Failed to load "testARM.axf"
! Failed to write 5.068 bytes to address S:0x00008000 while writing block of 4.096 bytes to address S:0x00008000
! Bus error on memory operation.
Target Message: Memory access caused precise abort.
Debug Precise Abort Registers : DFSR = 0x00001808, DFAR = 0x00008000
Working directory "C:\XXX\WorkspaceARM"
set debug-from main
! Failed to start the target
! No function named "main" could be found
WARNING(CMD407): Trying the entry point instead
ERROR(CMD426): Cannot find symbol to start or entrypoint, the file or load commands may be used to set the entrypoint
source /v "C:\opt\imx6_platform_sdk\tools\ds5\MX6Q_SabreSD_DDR3_v1.6.ds"
WARNING(CMD315): Target is not running
And here i am not sure how to fix that issue.
Got the problem solved. The change of the setting in DS-5 eclipse worked when setting up the adress spaces corectly and update the apropriate linker skript and use of debugger-script.
Thanks a lot Yuri!!
Retrieving data ...