Code warrior development studio professional edition V 8.8
=== Target Configuration Settings
=== Connection: CodeWarrior USB TAP
=== Target Processor: 8349
Any idea to resolve this error?
With the Project Wizard you can create an example for the processor and connection you're using.
this project will contain all default configuration needed.
You should be able to build it and debug the example application.
Is it working on your side ?
I have created the project with the required configuration, when i try to program the processor with the load, it shows
Initialization failed error.
Thanks and Regards,
Another point ...
There are seveal patches for CW for PA V8.8.
You can access them via the link:
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=CW-POWER-NETWORKING&fpsp=1&tab=Design_Tools_Tabexpand the Updates and Patches (13)Expand All
The last path is PA V8.8.6 which require another patch V8.8.5.
It seems that the memory controller is not properly configured. Have you checked the memory operation with the help of the CodeWarrior Hardware Diagnostics applet?
Retrieving data ...