I´m waiting for Can example of LUIS CASADO THANKS!!
C:\Freescale\CW MCU v10.4\MCU\CodeWarrior_Examples\Kinetis_Examples\k60\sci2can
Based on the SCI2CAN example in C:\Program Files\IAR Systems\Embedded Workbench 6.5\arm\examples\Freescale\Kinetis\sci2can
Change the file attached and you can commnicate two TWR's K60 using TWR-SER transceiver.
But I´m using code warrior, isn´t different?
This example use:
where can I find these .h?
Can you please send me the hedares file uart3.h and ringBuffer.h?
The same project should be included in IAR and CW. You can reuse the code mantaining the CW header files.
Thanks for all Santiago, my issue has been resolved.
I had a problem with the baud rate with the register crtl1 but I fixed it. Thanks!!!
i had a problem while testing two CAN module communication in twrk60f120. Here CAN0 is used as sending node whereas CAN1 as receiving node. But the problem is when flexcan write occurs in message buffer of CAN0 module ,no isr routine is executed.
Code for testing is attached .
Retrieving data ...