AnsweredAssumed Answered

i.mx6 sabrelite sgtl5000 code

Question asked by Ravi Kumar on May 23, 2013

Hi,

 

I am working on I.MX6 sabrelite board. While performing i2c_read on codec(assuming codec as i2c slave) at u-boot level, is giving error -19("No such device").

 

When I do i2c_probe it is not showing codec on i2c bus.

 

By default at u-boot level, dose codec gets power? (or) Need to power on through firmware ?

 

Please share some ideas on this issue to solve.

 

Regards,

Ravi

Outcomes