I have P3041 board (in tower encasing) but when I power on the led D5 is red.
Is it possible something is wrong with the ngPixis chip?
Anybody encountered similar issue?
This is copied from P3041DS document.
It seems for my board PX_CSR ='1'
What does that mean? The FPGA reports FAIL condition?
Just means D5 is lighted according to the document.
Is there any other abnormal phenomenon?
see the photo showing all the leds state. Hope it can give you some clue.
Could u find the cause of the problem, i am having the same situation in my board. The user guide/manual dosent explain the logic of ngpixis controlling the reset sequence. What are the causes/reasons for why D5 led is on? The explanantion given is weak and doesnt give much information about the situations that ngpixis lights on? D4 is ON blue--->all board voltage is ok, D5 is ON RED all/some board voltages are in poor condion? Is D4 telling the truth or D5????
We solved the problem by changing cpus. Although powerorient is ok, there seems a problem with CPU pins connections. We swapped CPU of a working board with this one and all is ok now, but doesn't change the poor document fact.
Retrieving data ...