i was useing general touch panel of the pmic mc34708，but，it is not available in my bsp ，did anyone can tell me where can i find it？
Open linux_top/drivers/input/touchscreen/Kconfig, and find :config TOUCHSCREEN_MXC
After "depends on " line, adding "|| MXC_MC34708_ADC"
like the following:
depends on MXC_MC13783_ADC || MXC_13892_ADC || MXC_MC34708_ADC
(2)Selecting "MXC touchscreen input driver" where is :
----input device support
---MXC touchscreen input driver
(3)Selecting MC34708 ADC driver
-----MXC support drivers
----MXC PMIC support
-----MC34708 ADC support
(4)Save and Exit, Recompiling linux kernel.
hi, i have problem with touchscreen 3M in imx53. The Linux have a generic driver "xserver-xorg-input-mutouch".
The module "usbtouchscreen" is loaded, but this module not is compiled to image linux lucid imx53 :-( and i can't load this module. i can execute this process in pc X86 (intel,amd) and install "xinput-calibrator" to calibrate touchscreen. i think we should start of this point. :-)
Did you add the USB touchscreen driver into linux kernel and re-compile it ?
Retrieving data ...