Vadivel murugan R

i.MX508 Booting Issue ..... -blog archive

Discussion created by Vadivel murugan R on Jul 14, 2012

Hi All,


           Nice to get support from our FSL engineer's.......

We have booting problem on i.MX508 board.we have checked the following bootup sequences

           1.Boot settings for MicroSD

           2.DCD for SDRAM controller

           3.OCRAM and ROM address as per data sheet

           4.Clock enabling at very first in Assembly files.

       while booting i.MX508 execute the DCD first or any other arm core related things first this is our major doubt.

Please give good guidelines to boot up the board.


Thanks in Advance

R.Vadivel Murugan

iWave Sytems.