Julien Da Silva

IMX28EVK linux with NAND driver

Discussion created by Julien Da Silva on Jul 12, 2012

Hello all,


I currently own a IMX28EVK and I would put a kernel 3.2 with the nand. But I encounter a problem when booting my kernel my nand is not detected but it is in UBoot.


If I put a 2.6.35 kernel I have no problem my nand is detected at the kernel boot.


So I think my problem comes from compiling my kernel, it's possible I'm missing an option, can you tell me what to check before my nand is detected?