Tips: How to log in when booting for the first time on a fresh BSP.

Discussion created by Claude_Sylvain on May 28, 2011

- After configuring/building/flashing a fresh i.MX53 QSB BSP
  (11.01 or 11.03), follow the above procedure to log in:

    - At log in prompt, just type "root" and [Enter].
      Remark: No need to enter a password.

    - To secure the i.MX53 QSB, create a "root" password by
      typing "passwd" and [Enter].
      Then, follow the instructions.