Brian Garber

MC9S12NE64 Ethernet question

Discussion created by Brian Garber on Aug 15, 2006
Latest reply on Aug 16, 2006 by Brian Garber
I have a module built by a third party vendor equipped with the 9S12NE64 and a Bel Stewart connector module. My design team and I have found that when we plug this module into an older Ethernet switch, everything works fine. But if we plug into a newer Ethernet switch the LINKLED doesn't light and it doesn't work.
 
We have been able to telnet to the module when plugged into an older switch so I don't suspect the software.
 
Anyone else had this issue?
 
Thanks,

Outcomes