bikash bag

unable to print in hyperterminal

Discussion created by bikash bag on Apr 6, 2012
Latest reply on Apr 9, 2012 by Abhinav Singh

hi, I am using codewarrior 10.2, mqx 3.8 and TWR-K40x256 board. I am
unable to print any message in hyperterminal(by printf()). I did all
the jumper settings in TWR-SER board. I trierd with
BSP_DEFAULT_IO_CHANNEL to "ttya" and "ttyd" also. Still I am unable
print any message in hyperterminal. pls, suggest the solution.