Hello,I'm new with my "tower" TWR-K60N512 and I wanted to consult about the development environment is superior and the most common.
I have recently bought a Tower board ( K60N512).
I have following questions:
1) I am planning on soldering an OEM chip on a prototyping board from freescale and want to establish communication between the chip and the Micro-controller PK60N512VMD100. Now i need to know pinout on the elevation boards and MC so that I can route my pin of my chip to apt pins on the tower board.
2) Can you suggest me thing that I need to know to accomplish above mentioned goal.
3) I followed a demo ( http://www.youtube.com/watch?v=gkL4n2b5RU4 ) and configure my K60 and the Serial board accordingly. I was not able to get any output form the board. When i tried connecting to the serial board using P&E utility then i kept getting " Failed to open. Plug Board into PC via USB cable"
I will highly appreciate your help.
I am interested in developing a platform using tower board, however it is so difficult to just to get started with the basic program. May be i am lost is plethora of
Retrieving data ...