Have you checked TWR-WIFI-AR4100 Product Summary Page ?
Go through Documentation and Downloads tabs,
there are some relevant assets you might wanna use and find useful.
is the module only usable from MQX ?
Is there a way to use it from FreeRTOS or even without an RTOS at all ?
Well it looks like it is quite impossible at the moment to get AR4100 from Arrow Electronics even thought they sell the tower freescale systems and AR4100 eval board.
I'm tying to testing the TWR-WIFI-AR4100 board with a MCF52259 (TWR board too).
But I'm not able to have the demo and config directories for my target, only for Kinetis...
There is a PDF file which describes the installation :
But the MQX version is 3.6. I can not start a new project with an older version of the OS !
My computer OS is Win XP, and I tried on my laptop under Win 7 ; the same.
Any ideas ? This board seems not to be used a lot in the world :-(
Always with my problems on my demo boards...
In fact, there is an error on this line, in RTCS.c :
error = ipcfg_init_device (IPCFG_default_enet_device, IPCFG_default_enet_address);
error is set to 0x1D03 => RTCSERR_IPCFG_INIT
I've compared with the ethernet demo (without WiFi, but with the SER tower board) and the big difference is the first parameter : 0 in the ethernet demo : 1 in the WiFi demo.
Someone here has already managed to run this board / demo ?
The AR4100 tower is out of stock everywhere I checked.
Is there anybody that has a spare or is done with the board? Pretty desperate to get my hands on one. Will reimburse your original purchase price with a handsome return!
I have the board, added the AR4100 to our product but have unable to buy the IC for the past 10 months. Its very sad other vendors dont support their dev boards! To test my protype I had to destroy an AR4100 dev board and get the IC off it.
Retrieving data ...