Discussion and help with using the Tower System as part of a robotics platform.
We have a system for building custom SMD and through hole circuit designs without pcb prototype runs. There are videos on our site for these type of projects. If anyone is interested in building a project with the AM1 Rapid Prototyping System and posting a video for this for others to see, we will supply the AM1 RPS kit for 2 projects. We would also post this on our site; if you approve we would include a reference to your company or site on our resources page. The Assembly Module 1 RPS is an SMD & through hole prototyping system for the tower. If you are interested please contact me with the project ideas via the web site support link www.iMnMicroControl.com with the project ideas. Or via this forum. Our current projects use Processor Expert Components and are built to migrate across processors, but there is no requirement to use PE if you prefer not to.
Shipping in June.
Cube-BEC is back and in track prototype stage. c-Link Systems is creating a track system with an extraordinary never-seen system of track tensioning and articulated road wheels. After searching the great wide internet no other desktop, indoor/outdoor tracked robot could be found. The current image has a Tower System installed and is mounted to a ROPS. Or those not used to construction vehicles that is a Roll-Over-Protection-System. On the top of the ROPS are threaded inserts for mounting cameras, lights, antennas and airsoft pellet guns. The rear gray deck is a dual purpose area; 1. Protection for the motors and power system, 2. Payload mount area.
Prerelease in June
cLS-FSTS-SSRB (Single System Robotic Board)
For those that want to use their tower system in a nasy enviroment I have just the thing. We will release the electroincs housings that we use on our bigger robots. The unit is IP67 rated, with custom 8-slot tower elevators and power supply.
Over the next few months there will be 2 robotic arms and Cube-BEC will be returned to the line-up.
Retrieving data ...