AnsweredAssumed Answered

TWR-K60N512 cannot get ethernet to work.

Question asked by Mike van Lammeren on Apr 19, 2012
Latest reply on Apr 24, 2012 by Paolo Alcantara Cadillo

I have followed the instructions in the TWR-K60N512 Quick Start Demo Lab Guide, and all the demos work, except for the Web Server demo.


On TWR-K60N512 board, I changed J6 to pins 2-3.

On TWR-SER board, I changed J2 to pins 3-4, added a jumper to J3 pins 2-3, and added a jumper to J12 pins 9-10.

(For the last two, I borrowed jumpers from J5, as directed in the lab instructions.)


One other thing -- I don't have an SD card handy, so I skipped that demo.


With an ethernet cable plugged in, the ethernet jack does not light up. It is either defective, or somehow turned off.


What do you think? I am just starting on my first Freescale project, and I would appreciate any suggestions.



Mike van Lammeren