RT1052烧录

cancel
Showing results for 
Search instead for 
Did you mean: 

RT1052烧录

908 Views
qiang
Contributor I

jlink连接RT1052主板总是失败aa8993939d1e4193c95ce28f734a251.png

0 Kudos
9 Replies

894 Views
qiang
Contributor I

您好,MCUXpresso ide 控制台显示以下信息代表烧录成功了吧

 

 

821fac2718e1fa63649b544b42c5ab4.png

0 Kudos

891 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi qiang,

   你这个结果不是很好嘛,内核Cortex M7也找到了,然后flash也烧进去了。

还有什么问题呢?

Wish it helps you!

If you still have questions about it, please kindly let me know!

Best Regards,

Kerry

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

 

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-----------------------------------------------------------------------------

0 Kudos

887 Views
qiang
Contributor I

暂时没有了,非常感谢

0 Kudos

870 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi qiang,

   好的,如果问题解决了,还请你标下正确答案, 用于关掉这个帖子。

    以后如果还有任何问题,欢迎你创建新的问题贴。

Wish it helps you!

If you still have questions about it, please kindly let me know!

Best Regards,

Kerry

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

 

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-----------------------------------------------------------------------------

0 Kudos

866 Views
qiang
Contributor I

我昨天已经可以烧录了,今天不知道怎麽回事又烧录不了了

296ae2ce72add76e37e2153fb46b8d7.png

0 Kudos

862 Views
kerryzhou
NXP TechSupport
NXP TechSupport

你试试这个方法:

板子进入serial downloader模式,然后再去连或者擦除用JLINK。

实在不行,你用MCUBootUtility使用Uart或者HID去链接试试。

https://github.com/JayHeng/NXP-MCUBootUtility/archive/v2.3.1.zip
the related user manual is:
https://github.com/JayHeng/NXP-MCUBootUtility

 

Wish it helps you!

If you still have questions about it, please kindly let me know!

Best Regards,

Kerry

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

 

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-----------------------------------------------------------------------------

0 Kudos

903 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi qiang

  楼主你好!

  你选择的是JTAG接口吗?

   你要选择SWD接口,RT芯片默认是使用SWD接口的。

   另外你的板子是自己设计的板子还是官方的EVK 板子?

  你先用SWD接口试试,还有,你截图要把所有JLINK COMANDER的信息都给我截出来,我要看全部信息。

Wish it helps you!

If you still have questions about it, please kindly let me know!

Best Regards,

Kerry

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

 

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-----------------------------------------------------------------------------

0 Kudos

899 Views
qiang
Contributor I

好的我试试SWD格式

0 Kudos

859 Views
qiang
Contributor I

问题已解决,谢谢

0 Kudos