[RT1050] Wifi disconnect and reconnect issue

cancel
Showing results for 
Search instead for 
Did you mean: 

[RT1050] Wifi disconnect and reconnect issue

412 Views
yen_chen
Contributor III

Hi,

I use wifi and connect to AP ,but it will disconnect and reconnect after 5 minutes.

Do I need set some setting for AP or wifi example?

=======================================================================

As below is my issue log .

[wifi_io] port=1000b mp_rd_bitmap=0x800 -> 0x0

[wpkt] IN: i/f: 0 len: 256
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xc
INT : rd_bitmap=0x1
INT : wr_bitmap=0xf01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xc
[wifi_io] RX: port=65536 rxlen=256 rx_blocks=1

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 256 ****
10 00 03 00 08 00 00 00 03 00 e4 c3 2a 49 66 d4
02 10 00 00 03 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

******** End Dump *******
[wifi_io] --- Rx: EVENT Response ---
[w_mem] [evtbuf] Alloc: A: 2022B8B8 S: 16
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xc
[wevt] EVENT - : 0x8 Len : 16 Reason: 3
[w_tmr] ============Deleting ti============mer: 2022B9============88
====
[w_mem] [mlaapp_cb: WLAn] Free: A: N: received2022B940
event 3
==[w_mem] [mla===========n] Free: A: ===========2022B8F8
============[w_mem] [evt====
app_cbuf] Free: Ab: WLAN: ne: 2022B8B8
twork authentication failed
[w_mem] [mlan]: Alloc: A: 2022BA50 S: 439
[w_mem] [mlan]: Alloc: A: 2022BC10 S: 280
[wscan] Channel: 1 Type: Active 8
[wscan] Channel: 2 Type: Active 8
[wscan] Channel: 3 Type: Active 8
[wscan] Channel: 4 Type: Active 8
[wscan] Channel: 5 Type: Active 8
[wscan] Channel: 6 Type: Active 8
[wscan] Channel: 7 Type: Active 8
[wscan] Channel: 8 Type: Active 8
[wscan] Channel: 9 Type: Active 8
[wscan] Channel: 10 Type: Active 8
[wscan] Channel: 11 Type: Active 8
[wscan] Channel: 12 Type: Passive 8
[wscan] Channel: 13 Type: Passive 8
[wcmdr] CMD --- : 0x6 Size: 105 Seq: 0
OUT_CMD**** Dump @ 20212960 Len: 109 ****
6d 00 01 00 06 00 69 00 00 00 00 00 01 00 00 00
00 00 00 12 01 09 00 00 70 65 67 61 74 65 73 74
02 01 02 00 04 00 01 00 0c 00 02 04 0b 0c 12 16
18 24 30 48 60 6c 2d 00 1a 00 2c 01 03 ff 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 01 01 15 00 00 01 02 00 00 6e 00 00
02 02 00 00 6e 00 00 03 02 00 00 6e 00
******** End Dump *******
INT : rd_bitmap=0x1
INT : wr_bitmap=0xf01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xc
[wifi_io] RX: port=65536 rxlen=256 rx_blocks=1

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 256 ****
0f 00 01 00 06 80 0b 00 00 00 00 00 00 00 00 00
00 00 00 12 01 09 00 00 70 65 67 61 74 65 73 74
02 01 02 00 04 00 01 00 0c 00 02 04 0b 0c 12 16
18 24 30 48 60 6c 2d 00 1a 00 2c 01 03 ff 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 01 01 15 00 00 01 02 00 00 6e 00 00
02 02 00 00 6e 00 00 03 02 00 00 6e 00 00 00 00
dd 1e 00 90 4c 33 2c 00 17 ff ff 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd 1a 00 90 4c 34 0b 00 05 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 dd 07 00 0c
43 00 00 00 00 62 32 2f 00 dd 7b 00 50 f2 04 10
4a 00 01 10 10 44 00 01 02 10 3b 00 01 03 10 47
00 10 38 83 30 92 30 92 18 83 9c 77 e4 c3 2a 49
66 c4 10 21 00 07 54 50 2d 4c 69 6e 6b 10 23 00
09 54 4c 2d 4d 52 36 34 30 30 10 24 00 03 33 2e

******** End Dump *******
[wifi_io] --- Rx: Cmd Response ---
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xc
[wcmdr] CMD-RESP: 0x6 Size: 11 Seq: 0 Result: 0
[w_mem] [mlan]: Alloc: A: 2022BD30 S: 952
[w_mem] [mlan] Free: A: 2022BD30
[wcmdr] CMD --- : 0x6 Size: 105 Seq: 0
OUT_CMD**** Dump @ 20212960 Len: 109 ****
6d 00 01 00 06 00 69 00 00 00 00 00 01 00 00 00
00 00 00 12 01 09 00 00 70 65 67 61 74 65 73 74
02 01 02 00 04 00 01 00 0c 00 02 04 0b 0c 12 16
18 24 30 48 60 6c 2d 00 1a 00 2c 01 03 ff 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 01 01 15 00 00 04 02 00 00 6e 00 00
05 02 00 00 6e 00 00 06 02 00 00 6e 00
******** End Dump *******
INT : rd_bitmap=0x1
INT : wr_bitmap=0xf01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xc
[wifi_io] RX: port=65536 rxlen=256 rx_blocks=1

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 256 ****
0f 00 01 00 06 80 0b 00 00 00 00 00 00 00 00 00
00 00 00 12 01 09 00 00 70 65 67 61 74 65 73 74
02 01 02 00 04 00 01 00 0c 00 02 04 0b 0c 12 16
18 24 30 48 60 6c 2d 00 1a 00 2c 01 03 ff 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 01 01 15 00 00 04 02 00 00 6e 00 00
05 02 00 00 6e 00 00 06 02 00 00 6e 00 00 00 00
dd 1e 00 90 4c 33 2c 00 17 ff ff 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd 1a 00 90 4c 34 0b 00 05 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 dd 07 00 0c
43 00 00 00 00 62 32 2f 00 dd 7b 00 50 f2 04 10
4a 00 01 10 10 44 00 01 02 10 3b 00 01 03 10 47
00 10 38 83 30 92 30 92 18 83 9c 77 e4 c3 2a 49
66 c4 10 21 00 07 54 50 2d 4c 69 6e 6b 10 23 00
09 54 4c 2d 4d 52 36 34 30 30 10 24 00 03 33 2e

******** End Dump *******
[wifi_io] --- Rx: Cmd Response ---
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xc
[wcmdr] CMD-RESP: 0x6 Size: 11 Seq: 0 Result: 0
[w_mem] [mlan]: Alloc: A: 2022BD30 S: 952
[w_mem] [mlan] Free: A: 2022BD30
[wcmdr] CMD --- : 0x6 Size: 105 Seq: 0
OUT_CMD**** Dump @ 20212960 Len: 109 ****
6d 00 01 00 06 00 69 00 00 00 00 00 01 00 00 00
00 00 00 12 01 09 00 00 70 65 67 61 74 65 73 74
02 01 02 00 04 00 01 00 0c 00 02 04 0b 0c 12 16
18 24 30 48 60 6c 2d 00 1a 00 2c 01 03 ff 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 01 01 15 00 00 07 02 00 00 6e 00 00
08 02 00 00 6e 00 00 09 02 00 00 6e 00
******** End Dump *******
INT : rd_bitmap=0x1
INT : wr_bitmap=0xf01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xc
[wifi_io] RX: port=65536 rxlen=256 rx_blocks=1

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 256 ****
0f 00 01 00 06 80 0b 00 00 00 00 00 00 00 00 00
00 00 00 12 01 09 00 00 70 65 67 61 74 65 73 74
02 01 02 00 04 00 01 00 0c 00 02 04 0b 0c 12 16
18 24 30 48 60 6c 2d 00 1a 00 2c 01 03 ff 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 01 01 15 00 00 07 02 00 00 6e 00 00
08 02 00 00 6e 00 00 09 02 00 00 6e 00 00 00 00
dd 1e 00 90 4c 33 2c 00 17 ff ff 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd 1a 00 90 4c 34 0b 00 05 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 dd 07 00 0c
43 00 00 00 00 62 32 2f 00 dd 7b 00 50 f2 04 10
4a 00 01 10 10 44 00 01 02 10 3b 00 01 03 10 47
00 10 38 83 30 92 30 92 18 83 9c 77 e4 c3 2a 49
66 c4 10 21 00 07 54 50 2d 4c 69 6e 6b 10 23 00
09 54 4c 2d 4d 52 36 34 30 30 10 24 00 03 33 2e

******** End Dump *******
[wifi_io] --- Rx: Cmd Response ---
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xc
[wcmdr] CMD-RESP: 0x6 Size: 11 Seq: 0 Result: 0
[w_mem] [mlan]: Alloc: A: 2022BD30 S: 952
[w_mem] [mlan] Free: A: 2022BD30
[wcmdr] CMD --- : 0x6 Size: 105 Seq: 0
OUT_CMD**** Dump @ 20212960 Len: 109 ****
6d 00 01 00 06 00 69 00 00 00 00 00 01 00 00 00
00 00 00 12 01 09 00 00 70 65 67 61 74 65 73 74
02 01 02 00 04 00 01 00 0c 00 02 04 0b 0c 12 16
18 24 30 48 60 6c 2d 00 1a 00 2c 01 03 ff 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 01 01 15 00 00 0a 02 00 00 6e 00 00
0b 02 00 00 6e 00 00 0c 13 00 00 64 00
******** End Dump *******
INT : rd_bitmap=0x1
INT : wr_bitmap=0xf01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xc
[wifi_io] RX: port=65536 rxlen=512 rx_blocks=2

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 512 ****
e1 01 01 00 06 80 dd 01 00 00 00 00 30 01 01 2e
01 e4 c3 2a 49 66 d4 28 47 be cc 3d 0f 00 00 00
64 00 11 04 00 08 70 65 67 61 74 65 73 74 01 08
82 84 8b 96 12 24 48 6c 03 01 0b 2a 01 04 32 04
0c 18 30 60 2d 1a 2c 00 17 ff ff 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3d 16 0b 00 05 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 30 14 01 00 00 0f ac 04
01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08
00 00 00 00 00 00 00 00 0b 05 0c 00 2d 12 7a dd
18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00
00 42 43 5e 00 62 32 2f 00 dd 7b 00 50 f2 04 10
4a 00 01 10 10 44 00 01 02 10 3b 00 01 03 10 47
00 10 38 83 30 92 30 92 18 83 9c 77 e4 c3 2a 49
66 c4 10 21 00 07 54 50 2d 4c 69 6e 6b 10 23 00
09 54 4c 2d 4d 52 36 34 30 30 10 24 00 03 33 2e
30 10 42 00 03 31 2e 30 10 54 00 08 00 06 00 50
f2 04 00 01 10 11 00 09 54 4c 2d 4d 52 36 34 30
30 10 08 00 02 21 08 10 3c 00 01 01 10 49 00 06
00 37 2a 00 01 20 dd 07 00 0c 43 00 00 00 00 13
01 08 00 54 be cc 3d 0f 00 00 00 2a 01 02 00 80
0a c6 01 8c 00 0a 00 00 b5 01 00 6b 00 61 00 0b
00 00 b5 0b 00 6b 00 5e 00 0c 00 00 ae 01 00 61
00 49 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 dd 1a 00 90 4c 34 0b 08 08 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3d

******** End Dump *******
[wifi_io] --- Rx: Cmd Response ---
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xc
[wcmdr] CMD-RESP: 0x6 Size: 477 Seq: 0 Result: 0
[w_mem] [mlan]: Alloc: A: 2022BD30 S: 952
[wscan] AP: xxxxtest
[w_mem] [mlan] Free: A: 2022BD30
[wcmdr] CMD --- : 0x6 Size: 91 Seq: 0
OUT_CMD**** Dump @ 20212960 Len: 95 ****
5f 00 01 00 06 00 5b 00 00 00 00 00 01 00 00 00
00 00 00 12 01 09 00 00 70 65 67 61 74 65 73 74
02 01 02 00 04 00 01 00 0c 00 02 04 0b 0c 12 16
18 24 30 48 60 6c 2d 00 1a 00 2c 01 03 ff 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 01 01 07 00 00 0d 13 00 00 64 00
******** End Dump *******
INT : rd_bitmap=0x1
INT : wr_bitmap=0xf01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xc
[wifi_io] RX: port=65536 rxlen=256 rx_blocks=1

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 256 ****
0f 00 01 00 06 80 0b 00 00 00 00 00 00 00 00 00
00 00 00 12 01 09 00 00 70 65 67 61 74 65 73 74
02 01 02 00 04 00 01 00 0c 00 02 04 0b 0c 12 16
18 24 30 48 60 6c 2d 00 1a 00 2c 01 03 ff 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 01 01 07 00 00 0d 13 00 00 64 00 00
3d 16 0b 00 05 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 30 14 01 00 00 0f ac 04
01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08
00 00 00 00 00 00 00 00 0b 05 0c 00 2d 12 7a dd
18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00
00 42 43 5e 00 62 32 2f 00 dd 7b 00 50 f2 04 10
4a 00 01 10 10 44 00 01 02 10 3b 00 01 03 10 47
00 10 38 83 30 92 30 92 18 83 9c 77 e4 c3 2a 49
66 c4 10 21 00 07 54 50 2d 4c 69 6e 6b 10 23 00
09 54 4c 2d 4d 52 36 34 30 30 10 24 00 03 33 2e

******** End Dump *******
[wifi_io] --- Rx: Cmd Response ---
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xc
[wcmdr] CMD-RESP: 0x6 Size: 11 Seq: 0 Result: 0
[w_mem] [mlan]: Alloc: A: 2022BD30 S: 952
[w_mem] [mlan] Free: A: 2022BD30
[w_mem] [mlan] Free: A: 2022BA50
[w_mem] [mlan] Free: A: 2022BC10
[wcmdr] CMD --- : 0xc4 Size: 36 Seq: 0
OUT_CMD**** Dump @ 20212960 Len: 40 ****
28 00 01 00 c4 00 24 00 00 00 00 00 01 00 00 00
00 00 08 00 70 65 67 61 74 65 73 74 3c 01 08 00
31 32 33 34 35 36 37 38
******** End Dump *******
INT : rd_bitmap=0x1
INT : wr_bitmap=0xf01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xc
[wifi_io] RX: port=65536 rxlen=256 rx_blocks=1

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 256 ****
28 00 01 00 c4 80 24 00 00 00 00 00 01 00 00 00
00 00 08 00 70 65 67 61 74 65 73 74 3c 01 08 00
31 32 33 34 35 36 37 38 0c 00 02 04 0b 0c 12 16
18 24 30 48 60 6c 2d 00 1a 00 2c 01 03 ff 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 01 01 07 00 00 0d 13 00 00 64 00 00
3d 16 0b 00 05 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 30 14 01 00 00 0f ac 04
01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08
00 00 00 00 00 00 00 00 0b 05 0c 00 2d 12 7a dd
18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00
00 42 43 5e 00 62 32 2f 00 dd 7b 00 50 f2 04 10
4a 00 01 10 10 44 00 01 02 10 3b 00 01 03 10 47
00 10 38 83 30 92 30 92 18 83 9c 77 e4 c3 2a 49
66 c4 10 21 00 07 54 50 2d 4c 69 6e 6b 10 23 00
09 54 4c 2d 4d 52 36 34 30 30 10 24 00 03 33 2e

******** End Dump *******
[wifi_io] --- Rx: Cmd Response ---
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xc
[wcmdr] CMD-RESP: 0xc4 Size: 36 Seq: 0 Result: 0
[w_mem] [mlan]: Alloc: A: 2022B930 S: 14
[w_mem] [mlan] Free: A: 2022B930
[wcmdr] CMD --- : 0x12 Size: 140 Seq: 0
OUT_CMD**** Dump @ 20212960 Len: 144 ****
90 00 01 00 12 00 8c 00 00 00 00 00 e4 c3 2a 49
66 d4 11 04 0a 00 64 00 74 00 00 08 00 70 65 67
61 74 65 73 74 03 00 01 00 0b 04 00 06 00 12 16
18 24 30 48 01 00 0c 00 82 84 8b 0c 12 96 18 24
30 48 60 6c 30 00 14 00 01 00 00 0f ac 04 01 00
00 0f ac 04 01 00 00 0f ac 02 00 00 2d 00 1a 00
2c 01 03 ff 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 01 01 07 00 00 0b
00 00 00 00 00 dd 00 07 00 00 50 f2 02 00 01 00

******** End Dump *******
INT : rd_bitmap=0x1
INT : wr_bitmap=0xf01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xc
[wifi_io] RX: port=65536 rxlen=256 rx_blocks=1

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 256 ****
b5 00 01 00 12 80 b1 00 00 00 00 00 11 04 00 00
0a c0 01 08 82 84 8b 96 12 24 48 6c 32 04 0c 18
30 60 dd 18 00 50 f2 02 01 01 00 00 03 a4 00 00
27 a4 00 00 42 43 5e 00 62 32 2f 00 2d 1a 2c 00
17 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 3d 16 0b 00 05 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd 1e 00 90 4c 33 2c 00 17 ff ff 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd 1a 00 90 4c 34 0b 00 05 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 dd 07 00 0c
43 00 00 00 00 62 32 2f 00 dd 7b 00 50 f2 04 10
4a 00 01 10 10 44 00 01 02 10 3b 00 01 03 10 47
00 10 38 83 30 92 30 92 18 83 9c 77 e4 c3 2a 49
66 c4 10 21 00 07 54 50 2d 4c 69 6e 6b 10 23 00
09 54 4c 2d 4d 52 36 34 30 30 10 24 00 03 33 2e

******** End Dump *******
[wifi_io] --- Rx: Cmd Response ---
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xc
INT : rd_bitmap=0x1
INT : wr_bitmap=0xf01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xc
[wifi_io] RX: port=65536 rxlen=256 rx_blocks=1

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 256 ****
5c 00 03 00 17 00 00 00 10 01 0a 00 00 00 00 00
00 00 00 00 00 00 10 01 0a 00 01 00 00 00 00 00
00 00 00 00 10 01 0a 00 02 00 00 00 00 00 00 00
00 00 10 01 0a 00 03 00 00 00 00 00 00 00 00 00
dd 00 18 00 00 50 f2 02 01 01 00 00 03 a4 00 00
27 a4 00 00 42 43 5e 00 62 32 2f 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

******** End Dump *******
[wifi_io] --- Rx: EVENT Response ---
[w_mem] [evtbuf] Alloc: A: 2022B930 S: 92
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xc
INT : rd_bitmap=0x1
INT : wr_bitmap=0xf01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xc
[wifi_io] RX: port=65536 rxlen=256 rx_blocks=1

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 256 ****
0a 00 03 00 2b 00 00 00 00 00 0a 00 00 00 00 00
00 00 00 00 00 00 10 01 0a 00 01 00 00 00 00 00
00 00 00 00 10 01 0a 00 02 00 00 00 00 00 00 00
00 00 10 01 0a 00 03 00 00 00 00 00 00 00 00 00
dd 00 18 00 00 50 f2 02 01 01 00 00 03 a4 00 00
27 a4 00 00 42 43 5e 00 62 32 2f 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

******** End Dump *******
[wifi_io] --- Rx: EVENT Response ---
[w_mem] [evtbuf] Alloc: A: 2022B998 S: 10
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xc
[wcmdr] CMD-RESP: 0x12 Size: 177 Seq: 0 Result: 0
[wevt] EVENT - : 0x17 Len : 92 Reason: 272
[w_mem] [evtbuf] Free: A: 2022B930

[wevt] EVENT - : 0x2b Len : 10 Reason: 0
[w_mem] [ev[wpkt] OUT: i/f: 0 len: 376
wlan_xmit_pkt: txportno = 8 mlan_adap->mp_wr_bitmap: f01
tbuf] Free: A: 2022B998

INT : rd_bitmap=0x1000
INT : wr_bitmap=0xe01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1000 curr_rd_bitmap=0xc
[wifi_io] RX: port=12 rxlen=768 rx_blocks=3

[wifi_io] port=1000c mp_rd_bitmap=0x1000 -> 0x0

[wpkt] IN: i/f: 0 len: 768
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xd
INT : rd_bitmap=0x1
INT : wr_bitmap=0xe01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xd
[wifi_io] RX: port=65536 rxlen=256 rx_blocks=1

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 256 ****
16 00 03 00 33 00 00 00 00 e4 c3 2a 49 66 d4 01
02 10 00 00 02 00 10 01 0a 00 01 00 00 00 00 00
00 00 00 00 10 01 0a 00 02 00 00 00 00 00 00 00
00 00 10 01 0a 00 03 00 00 00 00 00 00 00 00 00
dd 00 18 00 00 50 f2 02 01 01 00 00 03 a4 00 00
27 a4 00 00 42 43 5e 00 62 32 2f 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

******** End Dump *******
[wifi_io] --- Rx: EVENT Response ---
[w_mem] [evtbuf] Alloc: A: 2022B8B8 S: 22
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xd
[wpkt] OUT: i/f: 0 len: 376
wlan_xmit_pkt: txportno = 9 mlan_adap->mp_wr_bitmap: e01
[wevt] EVENT - : 0x33 Len : 22 Reason: 58368
[w_mem[w_mem] [ml] [evtbuf] Fan]: Alloc:ree: A: 2022 A: 2022B8FB8B8

8 S: 60
[w_mem] [mlan]: Alloc: A: 2022B940 S: 64
[w_tmr] Creating timer
[wcmdr] CMD --- : 0xcf Size: 24 Seq: 0
OUT_CMD**** Dump @ 20212960 Len: 28 ****
1c 00 01 00 cf 00 18 00 00 00 00 00 00 e4 c3 2a
49 66 d4 01 00 00 02 04 00 00 02 00
******** End Dump *******
INT : rd_bitmap=0x1
INT : wr_bitmap=0xc01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xd
[wifi_io] RX: port=65536 rxlen=256 rx_blocks=1

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 256 ****
1c 00 01 00 cf 80 18 00 00 00 00 00 00 e4 c3 2a
49 66 d4 01 00 00 02 04 00 00 02 00 32 04 0c 18
30 60 dd 18 00 50 f2 02 01 01 00 00 03 a4 00 00
27 a4 00 00 42 43 5e 00 62 32 2f 00 2d 1a 2c 00
17 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 3d 16 0b 00 05 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd 1e 00 90 4c 33 2c 00 17 ff ff 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd 1a 00 90 4c 34 0b 00 05 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 dd 07 00 0c
43 00 00 00 00 62 32 2f 00 dd 7b 00 50 f2 04 10
4a 00 01 10 10 44 00 01 02 10 3b 00 01 03 10 47
00 10 38 83 30 92 30 92 18 83 9c 77 e4 c3 2a 49
66 c4 10 21 00 07 54 50 2d 4c 69 6e 6b 10 23 00
09 54 4c 2d 4d 52 36 34 30 30 10 24 00 03 33 2e

******** End Dump *******
[wifi_io] --- Rx: Cmd Response ---
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xd
INT : rd_bitmap=0x2000
INT : wr_bitmap=0xc01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x2000 curr_rd_bitmap=0xd
[wifi_io] RX: port=13 rxlen=256 rx_blocks=1

[wifi_io] port=1000d mp_rd_bitmap=0x2000 -> 0x0

[wpkt] IN: i/f: 0 len: 256
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xe
INT : rd_bitmap=0x4000
INT : wr_bitmap=0xc01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x4000 curr_rd_bitmap=0xe
[wifi_io] RX: port=14 rxlen=256 rx_blocks=1

[wifi_io] port=1000e mp_rd_bitmap=0x4000 -> 0x0

[wpkt] IN: i/f: 0 len: 256
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xf
[wcmdr] CMD-RESP: 0xcf Size: 24 Seq: 0 Result: 0
INT : rd_bitmap=0x8000
INT : wr_bitmap=0xc01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x8000 curr_rd_bitmap=0xf
[wifi_io] RX: port=15 rxlen=768 rx_blocks=3

[wifi_io] port=1000f mp_rd_bitmap=0x8000 -> 0x0

[wpkt] IN: i/f: 0 len: 768
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0x1
[wpkt] OUT: i/f: 0 len: 68
wlan_xmit_pkt: txportno = 10 mlan_adap->mp_wr_bitmap: c01
[wpkt] OUT: i/f: 0 len: 68
wlan_xmit_pkt: txportno = 11 mlan_adap->mp_wr_bitmap: 801
INT : rd_bitmap=0x0
INT : wr_bitmap=0x7ff
INT : sdio_ireg = (0x2)
[wpkt] OUT: i/f: 0 len: 68
wlan_xmit_pkt: txportno = 1 mlan_adap->mp_wr_bitmap: 7ff
INT : rd_bitmap=0x2
INT : wr_bitmap=0x7fd
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x2 curr_rd_bitmap=0x1
[wifi_io] RX: port=1 rxlen=256 rx_blocks=1

[wifi_io] port=10001 mp_rd_bitmap=0x2 -> 0x0

[wpkt] IN: i/f: 0 len: 256
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0x2
[wpkt] OUT: i/f: 0 len: 68
wlan_xmit_pkt: txportno = 2 mlan_adap->mp_wr_bitmap: 7fd
[wpkt] OUT: i/f: 0 len: 68
wlan_xmit_pkt: txportno = 3 mlan_adap->mp_wr_bitmap: 7f9
========================================
app_cb: WLAN: received event 0
========================================
app_cb: WLAN: connected to network
Connected to following BSS:
SSID = [xxxxtest], IP = [192.168.1.4]

0 Kudos
19 Replies

407 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi yen_chen,

   Can you reproduce the issues in the SDK_2.9.1_EVKB-IMXRT1050\boards\evkbimxrt1050\wifi_examples directly with the MIMXRT1050-EVK and the related wifi module?

    If yes, please give me the detail steps to reproduce the issues, I will test it on my side and try to connect to the AP, just to check whether I also can reproduce the issues or not.

   Do you still use:

SDK_2.8.6, EVKB-IMXRT1050-OM13588

WIFI Board : WIFI_BOARD_AW_NM191MA

wifi_cli examples like your previous post?

 

Best Regards,

Kerry

0 Kudos

406 Views
yen_chen
Contributor III

Hi @kerryzhou 

I usually use 

SDK_2.8.6, EVKB-IMXRT1050-OM13588

WIFI Board : WIFI_BOARD_AW_NM191MA

wifi_cli examples

command :

1. wlan-scan : for scan device

2. wlan-add abc ssid xxxxtest wpa2 12345678

3. wlan-connect abc

It can connect success,but it will auto disconnect and reconnect after five to ten minutes.

My AP Setting and wifi example are default,maybe I need to set something for reconnect issue?

 

0 Kudos

397 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi yen_chen,

   Thanks for your information.

    Do you also test the newest SDK 2.9.1? Still reproduce the issues or not?

   Tomorrow, I will use my AzureWave AW-NM191NF-uSD and the MIMXRT1050-EVK board to test it, and give your my test result.

   Please keep patient, thanks.

Best Regards,

Kerry

0 Kudos

387 Views
yen_chen
Contributor III

HI @kerryzhou 

I think is port=65536 cause this error.

I don,t know why port will jump to port = 65536 when I use this AP.

I use another AP can work,but fail AP and success AP setting is same.

===================================================================

[wpkt] IN: i/f: 0 len: 512
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xb
INT : rd_bitmap=0x800
INT : wr_bitmap=0xf01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x800 curr_rd_bitmap=0xb
[wifi_io] RX: port=11 rxlen=256 rx_blocks=1

[wifi_io] port=1000b mp_rd_bitmap=0x800 -> 0x0

[wpkt] IN: i/f: 0 len: 256
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x0 curr_rd_bitmap=0xc
INT : rd_bitmap=0x1
INT : wr_bitmap=0xf01
INT : sdio_ireg = (0x1)
[wifi_io] wlan_get_rd_port: mp_rd_bitmap=0x1 curr_rd_bitmap=0xc
[wifi_io] RX: port=65536 rxlen=256 rx_blocks=1

[wifi_io] wlan_get_rd_port: port=65536 mp_rd_bitmap=0x0000
wlan_read_rcv_packet: DUMP:**** Dump @ 20213160 Len: 256 ****
10 00 03 00 08 00 00 00 03 00 e4 c3 2a 49 66 d4
02 10 00 00 03 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0 Kudos

381 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi yen_chen

 Sorry for my later reply.

   My WIFI module is taken by my colleague, and today, I didn't get that wifi module, so I can't test it, I will test it tomorrow.

  Before your jump to port = 65536, it is working, right? What's the port number?

 Does the port = 65536 is changed automatically?

  Tomorrow morning, I will test it.

Best Regards,

Kerry

0 Kudos

377 Views
yen_chen
Contributor III

Hi @kerryzhou 

It's ok ~

Before  jump to port = 65536, it is working .

The port = 65536 is changed automatically.

Port normal jump form 1 to 20,but jump to port 65536 it will disconnect .

My AP module is TL_MR6400 and use this AP will auto disconnect and reconnect.

Another AP can work normally.Only this AP : TL_MR6400 will cause this problem.

Thank you your support.

 

0 Kudos

354 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi yen_chen

   I am using my mobilephone sharing wifi, and after long time running, I didn't meet the disconnect issues.

   So, I think whether it is just related to your  TL_MR6400, eg, when long time no data transmit, your TL_MR6400  will disconnect the client directly?

 

Best Regards,

Kerry

0 Kudos

334 Views
yen_chen
Contributor III

Hi @kerryzhou 

I also think that is my module TL_MR6400 cause this problem,but another device connect to TL_MR6400 will not cause disconnect issue.

In the log , I can see that the data continues to be transferred, but it will suddenly cause disconnection problems.

I use mobile phone and another AP can work normally too ,but according to the above, there will be no problem connecting TL_MR6400 with other devices, only RT1050.

 

0 Kudos

324 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi yen_chen

  Just defined CONFIG_WIFI_EXTRA_DEBUG on your side will have that print log?

  I add the defined symbols:

image.png

And comment #undef CONFIG_WIFI_EXTRA_DEBUG in wifi_config.h.

image.png

But my log still don't like you.

image.png

 

Except your TL_MR6400, do you try any other router wifi AP? Any other wifi router reproduce the disconnect issues?

Best Regards,

Kerry

0 Kudos

320 Views
yen_chen
Contributor III

Hi @kerryzhou 

I change all #undef to #define in wifi_config.h for the debug log .

Only TL_MR6400 will cause this problem ,another APs can wrok normally.

But use TL_MR6400 share to another device not like the RT1050 cause disconnect issue,it's very weird.

0 Kudos

316 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi yen_chen,

   The attached log is my testing log, my port is also 65536.

   Please help to check ,whether that is similar to you?

   After connection, how do you find the disconnect after several minutes? On my side, after it is connected to my wifi, then no other logs anymore, even I test long time.

 

Best Regards,

Kerry

 

 

 

0 Kudos

310 Views
yen_chen
Contributor III

Hi @kerryzhou 

You can see my wifi_0202.log file 

authentication failed in my log and then disconnect and reconnect while using TL_MR6400.

I don't know why this AP will cause this issue.

 

Br,

Yen

Tags (1)
0 Kudos

306 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi yen_chen,

   In your log, I find this information:

twork authentication failed

authentication failed, seems is not stable.

The RT chip is WIFI4(802.11n), your TL_MR6400 is Wireless Standards: IEEE 802.11b/g/n 2.4GHz

Just from the wifi standard, your router should can support 802.11n WIFI4. Seems still the stability issues. Do you have any other router, whether it has issues or not?

Best Regards,

Kerry

 

 

0 Kudos

282 Views
yen_chen
Contributor III

Hi @kerryzhou 

How to fix the stability issues?

Other router didn't have this issue,only this router.

I just afraid the issue will happen again in the future.

0 Kudos

277 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi yen_chen,

  If it is your TL_MR6400 reject the AW_NM191MA, just from AW_NM191MA side, it is difficult to solve it.

To AW_NM191MA, maybe it is reject and cause the disconnect, then the AW_NM191MA try to connect it again.

   Anyway, I will try to help you to check with our wifi team colleague.

   But, due to the Chinese Spring Festival, maybe I will help you check after the vocation from Feb. 18th.

  In the meanwhile, maybe you can try to use other router.

   Sorry for the inconvenience we bring you.

Best Regards,

Kerry

0 Kudos

273 Views
yen_chen
Contributor III

Hi @kerryzhou 

OK,thank you your support.

If you have any idea ,please tell me !

 

Br,

Yen

0 Kudos

133 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi yen_chen,

   Really so sorry for the later reply.

   I already help you check with our internal side, but we need more your case information.

   Could you please tell us:

   Project name:

  End Application Name:

Project Annual Volume:

  Then, our expert will help you do more checking.

  Please give me the information ASAP, thanks so much!

BTW, next time, if you have any questions, I highly suggest you create the case instead of the community directly, as this method will be private.

case create method:

1. Open below SUPPORT site, click blue "Go to Tickets" in the middle.
http://www.nxp.com/support/support:SUPPORTHOME

2.Then you will be requested to Login, if you have no an account, please first Register with your business email.

3.After login, please "Create New Cases" button in the middle, then you can submit your question.

 

 

Best Regards,

Kerry

0 Kudos

356 Views
kerryzhou
NXP TechSupport
NXP TechSupport

Hi yen_chen,

  I test it on my side today, and test for a long time, I didn't meet the disconnect the issues.

 Just follow your mentioned command, I use these command:

1. wlan-scan : for scan device

2. wlan-add abc ssid AWS wpa2 kerry123456

3. wlan-connect abc

I test for about 30 minutes,  didn't meet the disconnect issues.

Could you please also let me know, use which command to printf your [wifi_io] related information?

Please give me the detail steps to reproduce the issues, thanks so much.

This is my log:

========================================
wifi cli demo
========================================
Initialize CLI
========================================
Initialize WLAN Driver
========================================
MAC Address: 70:66:55:7B:A9:4C
[net] Initialized TCP/IP networking stack
========================================
app_cb: WLAN: received event 10
========================================
app_cb: WLAN initialized
========================================
WLAN CLIs are initialized
========================================
CLIs Available:
========================================

help
wlan-version
wlan-mac
wlan-scan
wlan-scan-opt ssid <ssid> bssid ...
wlan-add <profile_name> ssid <ssid> bssid...
wlan-remove <profile_name>
wlan-list
wlan-connect <profile_name>
wlan-start-network <profile_name>
wlan-stop-network
wlan-disconnect
wlan-stat
wlan-info
wlan-address
wlan-get-uap-channel
wlan-get-uap-sta-list
ping [-s <packet_size>] [-c <packet_count>] [-W <timeout in sec>] <ip_address>
iperf [-s|-c <host>|-a|-h] [options]
dhcp-stat
========================================
wlan-scan
Scan scheduled...

# 10 networks found:
F8:C2:88:80:54:B0 "NXP" Infra
channel: 1
rssi: -75 dBm
security: WPA2 Enterprise
WMM: YES
9A:00:74:BD:80:F0 "ChinaNet-OHEY" Infra
channel: 1
rssi: -64 dBm
security: WPA/WPA2 Mixed
WMM: YES
F8:C2:88:80:54:B1 "NXPOPEN" Infra
channel: 1
rssi: -72 dBm
security: WPA2
WMM: YES
78:44:FD:EF:55:5B "TP-LINK_555B" Infra
channel: 11
rssi: -67 dBm
security: WPA/WPA2 Mixed
WMM: YES
82:DC:02:65:EA:21 "aisfibre_2.4G_65ea1f" Infra
channel: 1
rssi: -74 dBm
security: WPA2
WMM: YES
94:D9:B3:77:4F:B1 "RF_lab" Infra
channel: 1
rssi: -72 dBm
security: WPA/WPA2 Mixed
WMM: YES
AC:8D:34:30:CB:44 "CU_aVyw" Infra
channel: 2
rssi: -63 dBm
security: WPA/WPA2 Mixed
WMM: YES
CC:08:FB:D3:55:52 "TP-LINK_5552" Infra
channel: 6
rssi: -47 dBm
security: WPA/WPA2 Mixed
WMM: YES
CC:C2:E0:68:11:85 "ChinaNet-6gsq" Infra
channel: 11
rssi: -75 dBm
security: WPA/WPA2 Mixed
WMM: YES
B8:08:D7:CB:A9:57 "AWS" Infra
channel: 11
rssi: -16 dBm
security: WPA2
WMM: YES
wlan-add abc ssid AWS wpa2 kerry123456
Added "abc"

# wlan-connect abc
Connecting to network...
Use 'wlan-stat' for current connection status.

# ========================================
app_cb: WLAN: received event 0
========================================
app_cb: WLAN: connected to network
Connected to following BSS:
SSID = [AWS], IP = [192.168.43.71]

0 Kudos

332 Views
yen_chen
Contributor III

Hi @kerryzhou 

You need to go to source/wifi_config.h file.

Open the CONFIG_WIFI_EXTRA_DEBUG,and then you can see the extra log ,like wifi_io.

 

0 Kudos