RT1176降低内核电压至1.0V后部分板卡无法启动

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

RT1176降低内核电压至1.0V后部分板卡无法启动

403 次查看
Karvin
Contributor I

为了降低功耗,原本内核电压为1.15V,主频为M7/M4:1G/400M,降低到700M/240M,1.007V,发现部分板卡无法正常启动,上电后RT1176尝试启动,但无法启动成功,进行类似关机模式状态。JLINK可正常连接。

0 项奖励
回复
1 回复

388 次查看
Kan_Li
NXP TechSupport
NXP TechSupport

Hi @Karvin ,

 

你是指VDD_SOC_IN上的电压吗? 你的电源的tolerance是多少?当时芯片上运行的应用代码是哪个demo?涉及到哪些模块?

 

Have a great day,
Kan


-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

0 项奖励
回复