I have a RT1064 EVK which I've been using happily with MCUXpresso 11.0.1, until I tried to use the SDRAM. I used the technique described in https://community.nxp.com/message/1210007?commentID=1210007#comment-1210007 (I know, that's for the RT1050) but ever since downloading the resulting executable, I have not been able to debug anything - I get a popup saying "0 available SWD devices detected - Connect a device and try again". Restarting the board and MCUXpresso does not help. I can't download/debug even programs that used to work. How do I recover?
Thanks
Norm
Solved! Go to Solution.
Hello Norm,
Please see the attached step-by-step guide on how to recover your board.
Have a great day,
Victor
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------
Hello Norm,
Please see the attached step-by-step guide on how to recover your board.
Have a great day,
Victor
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------
Thanks, that worked great!
Norm