login username and password failure

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

login username and password failure

跳至解决方案
2,635 次查看
sanojkumar
Contributor II

Hi All,

I have been playing around with imx6q-SabreSD board for sometimes. I have compiled the source code with yocto for fsl-image-gui, I am able to flash and boot the kernel. However I am not able to login into the system. After wandering few websites and forums i did not find any default username and password for login (Someone says login:root & pass:<blank>). It  seems nothing is working here for me.

I have connected the HDMI with the board. Can anyone suggest me how to proceed with login. Or Can anyone tell me the correct login and Password?

I had compiled the source code with following command.

# bitbake fsl-image-gui

Thanks,

Sanoj Kumar

标签 (1)
1 解答
1,776 次查看
lijun
NXP Employee
NXP Employee

Hi Sanoj Kumar

     Did you do the right configure ?

     Yocto Training - HOME

     be attention to conf/local.conf, key word "MACHINE ??= 'imx6qsabresd'". if everything is correct, the username and password should be root.

     then if you still can not login you should paste your bootargs and your boot log.

     good luck!

John

在原帖中查看解决方案

4 回复数
1,777 次查看
lijun
NXP Employee
NXP Employee

Hi Sanoj Kumar

     Did you do the right configure ?

     Yocto Training - HOME

     be attention to conf/local.conf, key word "MACHINE ??= 'imx6qsabresd'". if everything is correct, the username and password should be root.

     then if you still can not login you should paste your bootargs and your boot log.

     good luck!

John

894 次查看
vivsundar
Contributor III

Hi lijun,

I am not able to view the link in your comment: https://community.nxp.com/docs/DOC-94849

Should I get special privileges to access this document? 

0 项奖励
1,776 次查看
gusarambula
NXP TechSupport
NXP TechSupport

The username and the password both should be root. Have you tried this?

0 项奖励
1,776 次查看
sanojkumar
Contributor II

Yes Gusarambula I did try root/root as username/password but still did not help me out .

0 项奖励