Hi.
The device file for ttyLP2 is not registered.
[environment]
・Android-11.0.0_2.6.0
・MCIMX8QM-CPU + MCIMX8-8X-BB
I changed the dts file(imx8qm-mek.dts) as below.
(lpuart2,3&4 status : "disabled" => "okay")
&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
status = "okay";
};
&lpuart1 { /* BT */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart1>;
resets = <&modem_reset>;
status = "okay";
};
&lpuart2 { /* Dbg console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart2>;
status = "okay";
};
&lpuart3 { /* MKbus */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart3>;
status = "okay";
};
&lpuart4 { /* arduino */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart4>;
status = "okay";
};
Then ttyLP3 and 4 were enabled, but ttyLP2 was ignored.
Why is ttyLP2 not registered?
What other changes do I need?
