i.MX6DL SabreSDB and IMXEBOOKDC4

[norishinozaki]

Hello,

I'd like to evaluate EPD with i.MX6DL SabreSDB.

However IMXEBOOKDC3 was discontinued.

Can I use new IMXEBOOKDC4 with i.MX6DL SabreSDB?

Connectors look same...

BR,

N.S

[Rita_Wang]

Hi Nori Shinozaki,

Here is your board i.MX6DL SabreSDP?

Have a nice day

Dan

[norishinozaki]

Hello Dan,

Yes, i.MX6DL SDP or SDB.

Probably SDB because SDP is discontinued.

Br, N.S.

[Rita_Wang]

Hi Nori Shinozaki,

I get the reply from our expert team. Yes, the IMXEBOOKDC4 should work well with the i.MX6DL board, but it requires a different touch driver.

Hope this can help you.
Have a great day,
Dan

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Mark Correct  button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

[norishinozaki]

Hello Dan,

Thanks for updating the information!

Let me confirm, the connector spec is the same and the display driver is the same also, but the touch screen driver need to be newly created.

Is this correct understanding?

BR,

Nori Shinozaki

[Rita_Wang]

Hi Nori Shinozaki,

Yes, you are right:smileyhappy:.

Have a nice day
Dan

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Mark Correct  button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

[norishinozaki · Accepted solution]

Hello Dan,

Thanks again!

BR,

N.S.

[Rita_Wang]

Hi Nori Shinozaki,

I am confirming it for you. Please wait with patience.

Have a nice day

Dan