Hardware: MCIMX6Q-SDB
Software: L4.14.98 2.0.0
After apply attached patch, sf probe can't detect SPI NOR flash on the EVK.
Solved! Go to Solution.
Hi, m.c
The SPI NOR Flash chip is DNP on i.MX6q SABRESD Board that is why it is not detected, see the below screenshot.
You need to first populate the Chip on Board.
--------------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
--------------------------------------------------------------------------------------------------------------------------
Regards,
Shivani
Hi, m.c
The SPI NOR Flash chip is DNP on i.MX6q SABRESD Board that is why it is not detected, see the below screenshot.
You need to first populate the Chip on Board.
--------------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
--------------------------------------------------------------------------------------------------------------------------
Regards,
Shivani