best way to port yocto porject to customer imx6 solo board

[hailiu]

Dear friends, I have the yocto project L5.4.24 ready, and plan to port it to my customer board. During the hardware debug process, I have the code to initialize all the peripherals, and I want to use them if possible, Where can I find the yocto source code to modify? what is the best way to port the project to my board? thank you, Hai

[joanxie]

if you mean uboot, you can refer to the dts file as below, then setting them according to your HW design

"https://source.codeaurora.org/external/imx/uboot-imx/tree/arch/arm/dts/imx6dl-sabresd.dts?h=imx_v202...

"https://source.codeaurora.org/external/imx/uboot-imx/tree/arch/arm/dts/imx6dl.dtsi?h=imx_v2020.04_5....

"https://source.codeaurora.org/external/imx/uboot-imx/tree/arch/arm/dts/imx6qdl-sabrelite.dtsi?h=imx_...

if you mean kernel, pls refer to the link as below:

"https://source.codeaurora.org/external/imx/linux-imx/tree/arch/arm/boot/dts?h=imx_5.4.70_2.3.0"