WM8962 no audio output with android 5.0.1

bolo · ‎07-01-2016

Hi community,

I have a custom H/W, and would like to configure the audio output. The CPU is an IMX6DL-Sabreauto, with a WM8962 codec. When I playback wmv、mp4 and mp3 files. There are no sound and data output from WM8962.

root@sabreauto_6q:/sdcard/Music # ls

Canon.mp3

a.wav

root@sabreauto_6q:/sdcard/Music # tinyplay a.wav

^C

root@sabreauto_6q:/sdcard/Music #

root@sabreauto_6q:/sdcard/Music # am start -n com.android.gallery3d/com.android.gallery3d.app.MovieActivity -d "/data/aa.mp4"

Starting: Intent { dat=/data/aa.mp4 cmp=com.android.gallery3d/.app.MovieActivity }

root@sabreauto_6q:/sdcard/Music #

root@sabreauto_6q:/sys/devices/soc0/sound-wm8962.31 # ls

HiFi

driver

modalias

power

sound

subsystem

uevent

at uevent <

DRIVER=imx-wm8962

OF_NAME=sound-wm8962

OF_FULLNAME=/sound-wm8962

OF_COMPATIBLE_0=fsl,imx6q-sabresd-wm8962

OF_COMPATIBLE_1=fsl,imx-audio-wm8962

OF_COMPATIBLE_N=2

MODALIAS=of:Nsound-wm8962T<NULL>Cfsl,imx6q-sabresd-wm8962Cfsl,imx-audio-wm8962

root@sabreauto_6q:/sys/devices/soc0/sound-wm8962.31 #

root@sabreauto_6q:/proc/asound # ls

card0

cards

devices

hwdep

oss

pcm

timers

version

wm8962audio

root@sabreauto_6q:/proc/asound # cat cards

0 [wm8962audio ]: wm8962-audio - wm8962-audio

wm8962-audio

root@sabreauto_6q:/proc/asound #

log as below:

Normal Boot

Hit any key to stop autoboot: 0

booti mmc0

kernel @ 14008000 (6824280)

ramdisk @ 15000000 (725544)

fdt @ 14f00000 (48257)

kernel cmdline:

use boot.img command line:

console=ttymxc3,115200 init=/init root=/dev/mmcblk0p5 rw video=mxcfb0:dev=ldb,bpp=16 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off fbmem=24M vmalloc=400M androidboot.console=ttymxc3 consoleblank=0 androidboot.hardware=freescale cma=384M androidboot.selinux=disabled androidboot.dm_verity=disabled

Using Device Tree in place at 14f00000, end 14f0ec80

Starting kernel ...

Booting Linux on physical CPU 0x0

Initializing cgroup subsys cpu

Initializing cgroup subsys cpuacct

Linux version 3.10.53-88204-g4f0dd92-dirty (thomas@thomas) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #46 SMP PREEMPT Thu Jun 30 16:48:56 CST 2016

CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine: Freescale i.MX6 Quad/DualLite (Device Tree), model: Freescale i.MX6 DualLite/Solo SABRE Automotive Board

cma: CMA: reserved 512 MiB at 2e000000

Memory policy: ECC disabled, Data cache writealloc

PERCPU: Embedded 8 pages/cpu @82003000 s9728 r8192 d14848 u32768

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522016

Kernel command line: console=ttymxc3,115200 init=/init root=/dev/mmcblk0p5 rw video=mxcfb0:dev=ldb,bpp=16 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off fbmem=24M vmalloc=1024M androidboot.console=ttymxc3 consoleblank=0 androidboot.hardware=freescale cma=512M androidboot.selinux=disabled androidboot.dm_verity=disabled

PID hash table entries: 4096 (order: 2, 16384 bytes)

Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Memory: 1983MB 64MB = 2047MB total

Memory: 1536400k/1536400k available, 560752k reserved, 1063936K highmem

Virtual kernel memory layout:

vector : 0xffff0000 - 0xffff1000 ( 4 kB)

fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

vmalloc : 0xbf800000 - 0xff000000 (1016 MB)

lowmem : 0x80000000 - 0xbf000000 (1008 MB)

pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)

modules : 0x7f000000 - 0x7fe00000 ( 14 MB)

.text : 0x80008000 - 0x80e75358 (14773 kB)

.init : 0x80e76000 - 0x80ecc600 ( 346 kB)

.data : 0x80ece000 - 0x80f4f280 ( 517 kB)

.bss : 0x80f4f280 - 0x80fe4038 ( 596 kB)

SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

Preemptible hierarchical RCU implementation.

RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.

NR_IRQS:16 nr_irqs:16 16

L310 cache controller enabled

l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32050000, Cache size: 524288 B

sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms

CPU identified as i.MX6DL, silicon rev 1.2

Console: colour dummy device 80x30

Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)

pid_max: default: 32768 minimum: 301

Security Framework initialized

SELinux: Initializing.

Mount-cache hash table entries: 512

Initializing cgroup subsys debug

Initializing cgroup subsys freezer

CPU: Testing write buffer coherency: ok

CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

Setting up static identity map for 0x807e6bc8 - 0x807e6c20

CPU1: Booted secondary processor

CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

Brought up 2 CPUs

SMP: Total of 2 processors activated (3162.11 BogoMIPS).

CPU: All CPU(s) started in SVC mode.

devtmpfs: initialized

pinctrl core: initialized pinctrl subsystem

regulator-dummy: no parameters

NET: Registered protocol family 16

DMA: preallocated 256 KiB pool for atomic coherent allocations

Use WDOG1 as reset source

syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered

vdd1p1: 800 <--> 1375 mV at 1100 mV

vdd3p0: 2625 <--> 3400 mV at 3000 mV

vdd2p5: 2000 <--> 2750 mV at 2400 mV

cpu: 725 <--> 1450 mV at 1150 mV

vddpu: 725 <--> 1450 mV

vddsoc: 725 <--> 1450 mV at 1175 mV

syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered

syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered

hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

hw-breakpoint: maximum watchpoint size is 4 bytes.

imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver

bio: create slab <bio-0> at 0

mxs-dma 110000.dma-apbh: initialized

wm8962-supply: 5000 mV

usb_h1_vbus: 5000 mV

usb_otg_vbus: 5000 mV

3P3V: 3300 mV

P3V3_SDa_SWITCHED: 3300 mV

i2c-core: driver [max17135] using legacy suspend method

i2c-core: driver [max17135] using legacy resume method

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

i2c i2c-0: IMX I2C adapter registered

pca953x 1-0030: failed reading register

pca953x: probe of 1-0030 failed with error -5

pca953x 1-0032: failed reading register

pca953x: probe of 1-0032 failed with error -5

pca953x 1-0034: failed reading register

pca953x: probe of 1-0034 failed with error -5

i2c i2c-1: IMX I2C adapter registered

Linux video capture interface: v2.00

pps_core: LinuxPPS API ver. 1 registered

PTP clock support registered

imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)

MIPI CSI2 driver module loaded

Advanced Linux Sound Architecture Driver Initialized.

Bluetooth: Core ver 2.16

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

Bluetooth: L2CAP socket layer initialized

Bluetooth: SCO socket layer initialized

pureg-dummy: no parameters

Switching to clocksource mxc_timer1

NET: Registered protocol family 2

TCP established hash table entries: 8192 (order: 4, 65536 bytes)

TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

TCP: Hash tables configured (established 8192 bind 8192)

TCP: reno registered

UDP hash table entries: 512 (order: 2, 16384 bytes)

UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

Trying to unpack rootfs image as initramfs...

Freeing initrd memory: 708K (85000000 - 850b1000)

hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available

mxc_epit: probe of 20d0000.epit failed with error -22

mxc_epit: probe of 20d4000.epit failed with error -22

Bus freq driver module loaded

console [pstore-1] enabled

ramoops: attached 0x100000@0x8bf00000, ecc: 0/0

mxc_ramoops device success loaded

futex hash table entries: 512 (order: 3, 32768 bytes)

audit: initializing netlink socket (disabled)

type=2000 audit(0.350:1): initialized

bounce pool size: 64 pages

VFS: Disk quotas dquot_6.5.2

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

NFS: Registering the id_resolver key type

Key type id_resolver registered

Key type id_legacy registered

NTFS driver 2.1.30 [Flags: R/W DEBUG].

fuse init (API version 7.22)

msgmni has been set to 1948

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

ldb ldb.14: split mode

ldb ldb.14: split mode or dual mode, ignoring second output

MIPI DSI driver module loaded

mxc_sdc_fb fb.22: registered mxc display driver ldb

imx-ipuv3 2400000.ipu: WARNING: adapt panel end blank lines

imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)

Console: switching to colour frame buffer device 128x37

mxc_sdc_fb fb.23: Can't get fb option for mxcfb1!

imx_epdc_fb 20f4000.epdc: can't get/select pinctrl

platform hannstar_cabc.20: Driver hannstar-cabc requests probe deferral

imx-sdma 20ec000.sdma: no iram assigned, using external mem

imx-sdma 20ec000.sdma: loaded firmware 1.1

imx-sdma 20ec000.sdma: initialized

pfuze100-regulator 0-0008: unrecognized pfuze chip ID!

pfuze100-regulator: probe of 0-0008 failed with error -5

Serial: IMX driver

21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX

21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 61) is a IMX

console [ttymxc3] enabled

serial: Freescale lpuart driver

imx sema4 driver is registered.

[drm] Initialized drm 1.1.0 20060810

[drm] Initialized vivante 1.0.0 20120216 on minor 0

brd: module loaded

loop: module loaded

tun: Universal TUN/TAP device driver, 1.6

CAN device driver interface

flexcan 2094000.can: device registered (reg_base=bfa88000, irq=143)

PPP generic driver version 2.4.2

PPP BSD Compression module registered

PPP Deflate Compression module registered

PPP MPPE Compression module registered

NET: Registered protocol family 24

usbcore: registered new interface driver asix

usbcore: registered new interface driver ax88179_178a

usbcore: registered new interface driver cdc_ether

usbcore: registered new interface driver net1080

usbcore: registered new interface driver cdc_subset

usbcore: registered new interface driver zaurus

usbcore: registered new interface driver cdc_ncm

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

ehci-platform: EHCI generic platform driver

ehci-mxc: Freescale On-Chip EHCI Host driver

usbcore: registered new interface driver cdc_acm

cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

usbcore: registered new interface driver usb-storage

usbcore: registered new interface driver usbserial

usbcore: registered new interface driver option

usbserial: USB Serial support registered for GSM modem (1-port)

ci_hdrc ci_hdrc.1: doesn't support gadget

ci_hdrc ci_hdrc.1: EHCI Host Controller

ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1

ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00

usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb1: Product: EHCI Host Controller

usb usb1: Manufacturer: Linux 3.10.53-88204-g4f0dd92-dirty ehci_hcd

usb usb1: SerialNumber: ci_hdrc.1

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

mousedev: PS/2 mouse device common for all mice

usbcore: registered new interface driver xpad

usbcore: registered new interface driver usb_acecad

usbcore: registered new interface driver aiptek

usbcore: registered new interface driver gtco

usbcore: registered new interface driver hanwang

usbcore: registered new interface driver kbtab

usbcore: registered new interface driver wacom

i2c-core: driver [isl29023] using legacy suspend method

i2c-core: driver [isl29023] using legacy resume method

snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0

i2c /dev entries driver

imx6dl-pinctrl 20e0000.iomuxc: pin MX6DL_PAD_CSI0_DAT8 already requested by 21a0000.i2c; cannot claim for 1-0021

imx6dl-pinctrl 20e0000.iomuxc: pin-33 (1-0021) status -22

imx6dl-pinctrl 20e0000.iomuxc: could not request pin 33 on device 20e0000.iomuxc

adv7180 1-0021: Error applying setting, reverse things back

DBG sensor data is at 80fbdbc0

imx6dl-pinctrl 20e0000.iomuxc: pin MX6DL_PAD_CSI0_DAT8 already requested by 21a0000.i2c; cannot claim for 1-0021

imx6dl-pinctrl 20e0000.iomuxc: pin-33 (1-0021) status -22

imx6dl-pinctrl 20e0000.iomuxc: could not request pin 33 on device 20e0000.iomuxc

adv7180 1-0021: Error applying setting, reverse things back

adv7180 1-0021: setup pinctrl failed

adv7180: probe of 1-0021 failed with error -22

mxc_v4l2_output v4l2_out.33: V4L2 device registered as video16

mxc_v4l2_output v4l2_out.33: V4L2 device registered as video17

usbcore: registered new interface driver uvcvideo

USB Video Class driver (1.1.1)

gspca_main: v2.14.0 registered

mag3110 1-000e: check mag3110 chip ID

mag3110 1-000e: read chip ID 0xfffffffb is not equal to 0xc4!

mag3110: probe of 1-000e failed with error -22

mma8x5x 1-001c: read chip ID 0xfffffffb is not equal to 0x1a,0x2a,0x3a,0x4a,0x5a!

mma8x5x: probe of 1-001c failed with error -22

imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)

device-mapper: uevent: version 1.0.3

device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com

Bluetooth: Virtual HCI driver ver 1.3

Bluetooth: HCI UART driver ver 2.2

Bluetooth: HCIATH3K protocol initialized

usbcore: registered new interface driver btusb

cpuidle: using governor ladder

cpuidle: using governor menu

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright(c) Pierre Ossman

sdhci-pltfm: SDHCI platform and OF driver helper

mmc0: no vqmmc regulator found

mmc0: no vmmc regulator found

mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA

mmc2: no vqmmc regulator found

mmc2: no vmmc regulator found

usb 1-1: new low-speed USB device number 2 using ci_hdrc

mmc0: host does not support reading read-only switch. assuming write-enable.

mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA

galcore: clk_get vg clock failed, disable vg!

Galcore version 5.0.11.25762

mmc0: new high speed SDHC card at address 1234

mmcblk0: mmc0:1234 SA08G 7.21 GiB

mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 > p4

mmcblk0: p4 size 12950932 extends beyond EOD, truncated

usb 1-1: New USB device found, idVendor=093a, idProduct=2510

usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

usb 1-1: Product: USB Optical Mouse

usb 1-1: Manufacturer: PixArt

mmc2: BKOPS_EN bit is not set

mmc2: switch to highspeed failed

mmc2: new MMC card at address 0001

mmcblk2: mmc2:0001 SEM04G 3.68 GiB

mmcblk2boot0: mmc2:0001 SEM04G partition 1 2.00 MiB

mmcblk2boot1: mmc2:0001 SEM04G partition 2 2.00 MiB

mmcblk2rpmb: mmc2:0001 SEM04G partition 3 2.00 MiB

mmcblk2: p1 p2 p3 < p5 p6 p7 > p4

mmcblk2boot1: unknown partition table

mmcblk2boot0: unknown partition table

mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed

mxc_asrc 2034000.asrc: mxc_asrc registered

mxc_vpu 2040000.vpu: VPU initialized

hidraw: raw HID events driver (C) Jiri Kosina

input: PixArt USB Optical Mouse as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1:1.0/input/input0

hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ci_hdrc.1-1/input0

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

ashmem: initialized

logger: created 256K log 'log_main'

logger: created 256K log 'log_events'

logger: created 256K log 'log_radio'

logger: created 256K log 'log_system'

usbcore: registered new interface driver snd-usb-audio

wm8962 0-001a: customer id 0 revision F

input: WM8962 Beep Generator as /devices/soc0/soc.1/2100000.aips-bus/21a0000.i2c/i2c-0/0-001a/input/input1

imx-wm8962 sound-wm8962.31: wm8962 <-> 202c000.ssi mapping ok

imx-wm8962 sound-wm8962.31: ASoC: no sink widget found for DMICDA

imx-wm8962 sound-wm8962.31: ASoC: Failed to add route DMIC -> direct -> DMICDA

NET: Registered protocol family 26

u32 classifier

Actions configured

Netfilter messages via NETLINK v0.30.

nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

ctnetlink v0.93: registering with nfnetlink.

NF_TPROXY: Transparent proxy support initialized, version 4.1.0

xt_time: kernel timezone is -0000

TCP: cubic registered

Initializing XFRM netlink socket

NET: Registered protocol family 10

mip6: Mobile IPv6

NET: Registered protocol family 17

NET: Registered protocol family 15

can: controller area network core (rev 20120528 abi 9)

NET: Registered protocol family 29

can: raw protocol (rev 20120528)

can: broadcast manager protocol (rev 20120528 t)

can: netlink gateway (rev 20130117) max_hops=1

Bluetooth: RFCOMM TTY layer initialized

Bluetooth: RFCOMM socket layer initialized

Bluetooth: RFCOMM ver 1.11

Bluetooth: BNEP (Ethernet Emulation) ver 1.3

Bluetooth: BNEP filters: protocol multicast

Bluetooth: BNEP socket layer initialized

Bluetooth: HIDP (Human Interface Emulation) ver 1.2

Bluetooth: HIDP socket layer initialized

8021q: 802.1Q VLAN Support v1.8

Key type dns_resolver registered

VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

regulator-dummy: disabling

imx mcc test is registered.

platform hannstar_cabc.20: Driver hannstar-cabc requests probe deferral

file system registered

android_usb gadget: Mass Storage Function, version: 2009/09/11

android_usb gadget: Number of LUNs=1

lun0: LUN: removable file: (no medium)

android_usb gadget: android_usb ready

input: gpio-keys.19 as /devices/soc0/gpio-keys.19/input/input2

platform hannstar_cabc.20: Driver hannstar-cabc requests probe deferral

snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1)

platform hannstar_cabc.20: Driver hannstar-cabc requests probe deferral

ALSA device list:

#0: wm8962-audio

Freeing unused kernel memory: 344K (80e76000 - 80ecc000)

init: /dev/hw_random not found

Console: switching to colour dummy device 80x30

init: /dev/hw_random not found

EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: barrier=1

fs_mgr: __mount(source=/dev/block/mmcblk0p5,target=/system,type=ext4)=0

EXT4-fs (mmcblk0p4): Ignoring removed nomblk_io_submit option

EXT4-fs (mmcblk0p4): recovery complete

EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc,errors=panic

fs_mgr: __mount(source=/dev/block/mmcblk0p4,target=/data,type=ext4)=0

EXT4-fs (mmcblk0p6): Ignoring removed nomblk_io_submit option

EXT4-fs (mmcblk0p6): recovery complete

EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: nomblk_io_submit

fs_mgr: __mount(source=/dev/block/mmcblk0p6,target=/cache,type=ext4)=0

EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)

fs_mgr: __mount(source=/dev/block/mmcblk0p7,target=/device,type=ext4)=0

binder: 125:125 transaction failed 29189, size 0-0

init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead

init: property 'ro.serialno' doesn't exist while expanding '$ro.serialno'

init: cannot expand '$ro.serialno' while writing to '/sys/class/android_usb/android0/iSerial'

init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead

init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead

init: cannot find '/system/bin/debuggerd64', disa▒init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'

android_usb: already disabled

mtp_bind_config

root@sabreauto_6q:/ # healthd: No battery devices found

imx-ipuv3 2400000.ipu: WARNING: adapt panel end blank lines

ERROR: v4l2 capture: slave not found!

warning: `main' uses 32-bit capabilities (legacy support in use)

request_suspend_state: wakeup (3->0) at 19427109001 (1970-01-01 00:00:18.366982668 UTC)

Thanks and regards

Apollo

igorpadykov · ‎07-01-2016

Hi Appolo

to be able to play these files, it is necessary to install additional

extended package, please refer to attached Release Notes sect.6

Freescale Extended Feature Packages. Also

WMV is Restricted Distribution codec package, requires

agreement to be in place with Microsoft (distribution is done via

controlled access extranet site).

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

WM8962 no audio output with android 5.0.1

WM8962 no audio output with android 5.0.1

Android

i.MX6DL