Hi Everyone,
Does anyone experience porting USB2514 USB HUB on U-BOOT?
Eric
Hi Eric
seems this hub is used on sabrelite board
https://boundarydevices.com/sabre_lite-revD.pdf
and one can look at its BSP:
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi Igorpadykov,
Thanks for you reply.
I know these designed you provided, but the problem that I met , is u-booot stage.
I can't detect USB storage , the USB storage is connected to USB2514 HUB.
Please see message below:
U-Boot > usb start
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Eric
suggest to try latest
https://boundarydevices.com/compiling-latest-u-boot-for-i-mx6-2015-edition/
Best regards
igor