Need to transfer data through USB in I.MX8MMINI EVK

[subhash_ponnusamy]

Hi NXP,

I'm using a USB to multipurpose UART chip(FT4232H). I need to communicate with this chip through USB2.0 from my IMX8 evk. 

How can I enable USB2.0 in cortex A53 or M4 core of I.MX8MMINI EVK . 

I need to pass commands and get data from that chip.

Regards,

Subhash

[igorpadykov]

Hi Subhash

one can look at NXP linux documentation, in particular sect.4.9.6 Menu Configuration Options

i.MX Linux Reference Manual​

https://www.nxp.com/design/software/embedded-software/i-mx-software/embedded-linux-for-i-mx-applicat...

FT4232H drivers can be found on  https://ftdichip.com/drivers/

https://www.ftdichip.com/Support/Documents/AppNotes/AN_220_FTDI_Drivers_Installation_Guide_for_Linux...

https://www.raspberrypi.org/forums/viewtopic.php?t=201360

Best regards
igor