My kernel-4.9.88 based on evk for mfgtools got stuck

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

My kernel-4.9.88 based on evk for mfgtools got stuck

Jump to solution
598 Views
tootzoe
Contributor III

hi nxp experts:

 I'm now building a kernel-4.9.88 for mfgtools, i copy source code from yocto based on imx6sl-evk board, and make some changes( removing PMIC , adding usdhc4 for eMMC). u-boot is good for running, but kernel got stuck on the same place, please see my attached logs, and also attached my dts file, please point me where is wrong, did i cut down  too much functions?

Best regards!

toot_hzf

Labels (1)
0 Kudos
1 Solution
442 Views
tootzoe
Contributor III

i found the issues  , for i removed the pmic from dts,  when i uncomment pmic, it's ok now.....thanks 

View solution in original post

0 Kudos
1 Reply
443 Views
tootzoe
Contributor III

i found the issues  , for i removed the pmic from dts,  when i uncomment pmic, it's ok now.....thanks 

0 Kudos