LMT101ENMFWD-ACD LCD 10.1'' HDMI with i.MX 8M Plus EVK Board

[eslam]

Hi, 

i am using LMT101ENMFWD-ACD LCD 10.1" with the i.MX 8M Plus EVK Board through HDMI connection. 

i have flashed the i.MX 8M Plus EVK with LF_v6.12.34-2.1.0_images_IMX8MPEVK.zip image

When the board boots up, the default resolution causes the content on the display to be squished.

i tried to update the weston.ini file but no impact happens. 

could you please tell me step by step how to update the resolution?

thanks

Eslam

[AldoG]

Hello,

You may refer to the following community document if you are using HDMI port it is pretty straight forward:
https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/How-to-change-the-HDMI-pixel-clock-and-c...

Hope this helps,
Best regards/Saludos,
Aldo.