IMX6UL Uboot recovery

[balasubram]

Hi, 

I have custom board based on imx6ul processor which has Nand flash, JTAG and UART console only(No USB, No Ethernet, No serial downloader boot mode ). There was on factory uboot boolader on my board and usally i do flash images by loading uboot, kernel, RFS to ram and ram to Nand flash via uboot nand commands. But accidentally i flashed other board Uboot bootloader on my board Nand flash. Now board is hangs on uboot dram initialization. Not able to access uart console and through jtag-openocd not able initialize the DRAM.  pls help me on this how to recover.

[Yuri]

Hello,

  You may try the recent package with demo images:

https://www.nxp.com/webapp/Download?colCode=L4.14.98_2.0.0_MX6UL7D&appType=license 

Summary Page:

i.MX Software | NXP 

Have a great day,

Yuri

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.