Hi All,
I like to know the purpose of the regulators in the ov5640_mipi.c driver module. There are three regulators described in dtb
DOVDD-supply = <®_1p8v>;
AVDD-supply = <®_2p5v>;
DVDD-supply = <®_1p8v>;
What function do they do ? does this powers the camera module? I could only see 5V supply going to the camera module in schematics (Wandboard-dual). If my camera module is powered externally do i need these lines ?
Solved! Go to Solution.
Hi anjo
for regulators one can look at sabre sd schematic spf-27392 p.8
Schematics (1)
i.MX6_SABRE_SDP_DESIGNFILES
http://www.nxp.com/products/software-and-tools/hardware-development-tools/sabre-development-system/s...
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi anjo
for regulators one can look at sabre sd schematic spf-27392 p.8
Schematics (1)
i.MX6_SABRE_SDP_DESIGNFILES
http://www.nxp.com/products/software-and-tools/hardware-development-tools/sabre-development-system/s...
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------