Hi Mac
first enable internal clock for SATA blowing fuse:
iim blow 4 3 4
then follow similar procedure for i.MX6
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi Mac
first enable internal clock for SATA blowing fuse:
iim blow 4 3 4
then follow similar procedure for i.MX6
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hardware Reference Manual for i.MX53 Quick Start
5.4.2. Boot Mode Operations and Selections
Do you know that you have to install a DIP switch on the board, and remove and rearrange a whole bunch of resistors in order to select a SATA boot?
Tom