I am not able to boot i.MX6 Quad custom board using SD card(SD4)

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

I am not able to boot i.MX6 Quad custom board using SD card(SD4)

1,156件の閲覧回数
rameshasp
Contributor IV

I am not able to boot i.MX6 Quad custom board using SD card(Port selection is SD4). could you please help me how bring up this device.

  • We were using eMMC instead of SD card in SD4 portal and eMMC was 8bit.
  •  Current version has SD card 4bit in SD4 portal.
  • SD card has CD/DATd.3 multiplexed pin.

So please help me to resolve and bring up this device.

Advance Thanks,

Ramesha S P

ラベル(1)
タグ(1)
2 返答(返信)

1,104件の閲覧回数
Bio_TICFSL
NXP TechSupport
NXP TechSupport

Hello Ramesha,

Check section 4.5.4 of your Linux User guide it show you how to boot form SD4 pin connection for MX6 and the boot settings.

Regards

1,104件の閲覧回数
rameshasp
Contributor IV

This information is very useful.

Thank you very much.

Ramesha S P

0 件の賞賛
返信