How to Port Android on MCIMX6Q-SDB using mfgtool

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

How to Port Android on MCIMX6Q-SDB using mfgtool

跳至解决方案
989 次查看
asick
Contributor III

I have all images on $:~/android_build/out/target/product directory.

• /u-boot-imx6q.imx
• /partition-table.img
• /boot-imx6q.img (boot.img)
• /system.img
• /recovery-imx6q.img
• /vendor.img

How to port all .img and .imx file on to SD card using MFGtool.

mcimx6qsdb mfg-tool

android9‌ #android8.0

标签 (1)
1 解答
879 次查看
AldoG
NXP TechSupport
NXP TechSupport

Hello,

 

Please take a look to section 3.3 Flashing board images of the Android_Quick_Start_Guide.pdf attached here

 

Hope this helps,

Best regards,

Aldo.

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

在原帖中查看解决方案

1 回复
880 次查看
AldoG
NXP TechSupport
NXP TechSupport

Hello,

 

Please take a look to section 3.3 Flashing board images of the Android_Quick_Start_Guide.pdf attached here

 

Hope this helps,

Best regards,

Aldo.

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------