Enabling all UARTs on CC 6UL SBC Express boards.

cancel
Showing results for 
Search instead for 
Did you mean: 

Enabling all UARTs on CC 6UL SBC Express boards.

143 Views
s_mazumder
Contributor I

I have a Connect Core 6UL SBC Express board. I want to enable the other UARTs.
UART 4 is enabled on the expansion connector and UART 5 is routed to console.
I want to enable any other UARTs.

Thanks in advance.
0 Kudos
1 Reply

61 Views
gusarambula
NXP TechSupport
NXP TechSupport

Hello S Mazumder,

I would recommend looking at the available documentation and support from the board manufacturer, Digi. (Please see the link below). I am not familiar with this board but seems only two UARTs are reachable on this board. 

https://www.digi.com/products/embedded-systems/single-board-computers/connectcore-for-i-mx6ul-sbc-ex...

I hope this helps!

Regards,

0 Kudos