ERR009165 on i.MX6UL(L)

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

ERR009165 on i.MX6UL(L)

ソリューションへジャンプ
1,006件の閲覧回数
ceggers
Contributor V

The current IMX6ULLCE.pdf (Rev. 2) adds ERR009165. But in his recent SPI/SDMA patch series, Robin Gong states that i.MX6ULL is not affected:

There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO transfer to be send twice in DMA mode.

...

The issue should be exist on all legacy i.mx6/7 soc family before i.mx6ul. NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/ 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips still need this workaroud.

...

v3: 1.Confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips.

So it sounds like the errata sheet is wrong. Can anyone from NXP please confirm this?

regards,
Christian

0 件の賞賛
1 解決策
986件の閲覧回数
jimmychan
NXP TechSupport
NXP TechSupport

Hello @ceggers ,

 

I got the confirmation:

Yes, NXP i.mx6ul/ 6ull/6sll/6ulz do not need this workaround anymore.

Internal ticket submitted and Doc team will update the related errata document later.

 

Best regards,

Jimmy

元の投稿で解決策を見る

0 件の賞賛
2 返答(返信)
987件の閲覧回数
jimmychan
NXP TechSupport
NXP TechSupport

Hello @ceggers ,

 

I got the confirmation:

Yes, NXP i.mx6ul/ 6ull/6sll/6ulz do not need this workaround anymore.

Internal ticket submitted and Doc team will update the related errata document later.

 

Best regards,

Jimmy

0 件の賞賛
995件の閲覧回数
jimmychan
NXP TechSupport
NXP TechSupport

I will check this for you.

0 件の賞賛