Hello,
I currently have a 8m nano evk with an OnSemi AS0260 camera connected to the Mini-SAS port using a custom connector board. I am able to create a bootable SD card using the default evk linux (full) image provided by NXP. I believe the next steps are to modify or add a driver for the camera. What is the procedure, or where are the files that I need to modify to communicate with this camera?
Hi Ed
for new camera may be useful to look at
https://www.digi.com/resources/documentation/digidocs/embedded/dey/2.6/cc8mnano/bsp_r_camera_8m
example for 2 lanes sensor adjusting hs-settle, clk-settle :
https://source.codeaurora.org/external/imx/linux-imx/tree/arch/arm64/boot/dts/freescale/imx8mn-evk.d...
Best regards
igor