AMP(Asymmetric multiprocessing) on i.MX6 Dual or i.MX6 Quad

[jackeyko]

Hi NXP,

Does  the i.MX6 Dual or i.MX6 Quad support  AMP mode?

I woluld like to apply AMP mode on the SabreSD.

AMP mode is CPU0(Linux) and CPU1(FreeRTOS or QNX Neutrino).

Thanks,

Jackey

[jackeyko]

Hi igor,

Thanks for your suport.

I understood that the official bsps release in nxp does not support AMP.

So can you provide a bsp code with AMP fuction for i.MX6DQ?

Thanks,

Jackey

[jackeyko]

Hi igor,

Can you provide the bsps patch with AMP for i.MX6DQ?

I'd like to know whether it is possible or not.

Linux ver : 3.14.38

U-Boot ver : 2005.04

Thanks,

Jackey

[igorpadykov]

Hi Jackey

nxp does not support amp for i.MX6DQ in its official bsps releases.

That means no bsps patches are available, sorry.

Best regards
igor

[igorpadykov]

Hi Jackey

nxp does not support amp for i.MX6DQ in its official bsps releases, one can look

https://community.freescale.com/docs/DOC-94513
http://www.dave.eu/sites/default/files/an-xelk-001-amp-linux-freertos.pdf

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------