24 Mhz Oscillator Not Starting iMX6UL Rev 1.2

[summertanks]

I am using MCIMX6G3CVM05AB

iMX6 UltraLite MAPBGA 14x14 0.8mm 528MHz

Rev 1.2 Maskest ID 2N52P

2. Errata on the i.MX 6UltraLite. 

Reference Schematic is 

3. Reference Schematic migration

Hence Circuit becomes

My Schematic

At C28 Pin 1 - Vavg 105mV

At C27 Pin 1 - Frequency 32.765 KHz

At Pin C26 Pin 1 - Vavg 115mV

At C25 Pin 1 - Frequency - Nil Vavg 480mV

   

POR is Good, All Power rails are good.

So Question is : Why is the oscillator not starting up? 

 

  

[embedded_Dev]

Hi igorpadykov
      

Can u please share me the schematic document for MCIMX6G3CVM05AB  of series SCH-28616 REV C3
Thanks in advance

[summertanks]

I don't have that. I have 28617 Rev C1. Which is the latest?

Please share the same with me if possible.

[igorpadykov]

Hi summertanks

one can try with other crystal or consider Table 11. Oscillator and clock recommendations

Hardware Development Guide for the i.MX 6UltraLite Applications Processor

like 24Mhz crystal requirements, try to adjust XTALI bias resistor.

Best regards
igor