NxH2280 how to create multi-connection ?

[esgbaek]

Hi.

I am using Nxh2280 to develop wireless earphone.

Basic structure of product consist of 1 creator(A) and 2(B and C) joiner.

Base on 48KHzAudioDemo,

A - B connection is ok.

but after A - B connection, C can not join the network.

Please give me your idea.

[jasonchiang]

      If you want 1 creator and 2 joiner( L / R), we have audio dual mono high quality demo example in our NxH2281 application note. As I know, this demo example is supported at NxH2281(SDK 4.1), not NxH2280.

[vicentegomez]

Hi Esg

Please help me, if you have more question about the NxH228x, create a case request, the information is under NDA

Regards

Vicente Gomez

[esgbaek]

Hi. Vincente.

Actually I already tested Dual mono high quality demo with NxH2281, it worked well.

So please let me know the procedure for NDA.

- Surely we will meet some difficulty while developing NxH2281 so that we ask you or get further information.

Regards.

Esg.

[vicentegomez]

Hi

You need to contact your local distributor like Arrow, Avnet etc for that, They already knows the NDA process.

Please let me know if you do not have any distributor.

Regards

Vicente Gomez

[esgbaek]

Hi.

I checked with Management Division, we already finished NDA process with Arrow Korea.

As to QnA procedure, so far we have done questions to Arrow Korea.

However we did not get good answers - because i guess that they also pass questions to NXP and wait.

So I joined this community to get correct technical answers quickly.

Please advise, we should have to ask to Arrow Korea for technical questions ??

or can use this community for NxH2281 ??

[vicentegomez]

Hi

is better use arrow for that, if you have the case number just let me know and I check it.

Regards