Radio testing of FRDM-KW24D using Test tool 12.5

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Radio testing of FRDM-KW24D using Test tool 12.5

935 Views
zeshanyousaf
Contributor I


Hi,

It is also not clear to use which*.srec file for Radio testing. I tried "MAC 2006 ZTC 115200 KW24D512-USB ASP_Radiotest.srec (as shown below). But I still dont see any signal at the  SMA connector of Freedom Board.

Thanks.

0 Kudos
4 Replies

650 Views
mario_castaneda
NXP TechSupport
NXP TechSupport

Hi Zeshan,

It is not possible see the file, could you please try again.?

If you want to make a Radio testing, you can check the next link, the option build and run.

FRDM-KW24D512|Freedom Development Platform|Kinetis|NXP

Let me know if you have problems.

Mario

0 Kudos

650 Views
zeshanyousaf
Contributor I

Hi Mario,

I highlight the firmware which I used to do Radio Testing. What could be the problem?

KW24D512.jpg

I dont understand which link you mean?

Regards,

Zeshan

0 Kudos

650 Views
mario_castaneda
NXP TechSupport
NXP TechSupport

Hi Zeshan,

Could you please check the next document?, Quick Start, USB-KW24D512

http://www.nxp.com/files/32bit/doc/user_guide/USBKW24D512QSG.pdf?fsrch=1&sr=6&pageNum=1

Let me know, if you upload another example and the problem is the same

Best Regards

Mario

0 Kudos

650 Views
zeshanyousaf
Contributor I

0 Kudos