K32W Flash Programmer

cancel
Showing results for 
Search instead for 
Did you mean: 

K32W Flash Programmer

120 Views
Contributor V

K32W board needs to use FTDI_USB or USB_UART to execute Flash Prrogrammer.
But usually Uart of SOC is directly connected to PIO8/PIO9(TX/RX) of K32W, and there is no FTDI_USB/USB_UART
How does SOC do Flash Programmer?

Labels (1)
  • KW

0 Kudos
3 Replies

38 Views
Contributor V

What I want to know is, how is the software implemented?
How can "DK6Programmer.exe" be executed on SOC (WIFI-module) for Linux system?

0 Kudos

38 Views
NXP TechSupport
NXP TechSupport

Hi Daniel,

I will get back with you, for this specific support,  internally.

Regards,

Mario

0 Kudos

38 Views
NXP TechSupport
NXP TechSupport

Hi Daniel,

I hope you are doing great.

How does SOC do Flash Programmer?

Our EVB provides 2 different ways to program the JN5169, using the LPC or the FTDI. You could select depending on the jumper set up of the JP7 and JP4.

pastedImage_1.png

In this case, the ISP_TX_TRGT and ISP_RX_TRGT are connected to the PIO8/PIO9(TX/RX).

pastedImage_4.png

For a better reference, you could look at the K32W Datasheet.

Regards,

Mario

0 Kudos