How to add an endpoint and a cluster to a ZigBee device in the BeeStack

cancel
Showing results for 
Search instead for 
Did you mean: 

How to add an endpoint and a cluster to a ZigBee device in the BeeStack

How to add an endpoint and a cluster to a ZigBee device in the BeeStack

Hello community,

This time I bring to you a document which explains how easy is to add a new endpoint and a new cluster to a ZigBee device in the BeeStack in BeeKit. This document is based in the MC1323x MCUs but the procedure applies to the Kinetis devices.

Before to start you need to install the BeeKit Wireless Connectivity Toolkit​.

If you are interested about what an endpoint is, the document ZigBee Endpoints Reserved could be useful for you.

http://icon.asid.org/wp-content/uploads/2014/11/40349344_thumbnail.jpg

I hope you find this guide useful. Enjoy this guide, enjoy ZigBee! Any feedback is welcome.

Best regards,

Earl Orlando Ramírez-Sánchez

Technical Support Engineer

NXP Semiconductors

Labels (2)
Attachments
Version history
Revision #:
1 of 1
Last update:
‎12-16-2015 07:15 PM
Updated by: