NXP Cup 2018 Qualification Event PHELMA Grenoble, France

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

NXP Cup 2018 Qualification Event PHELMA Grenoble, France

Jump to solution
1,092 Views
stiffanconsult
Contributor III

The PHELMA Grenoble will be hosting the NXP Cup EMEA qualification event scheduled for 14-15 March 2018.

Note the tentative agenda knowing that the official training and race are scheduled for 15 March 2018:

Wednesday March 14th:
Track setup
Unformal training session early afternoon
Thursday March 15th:
9:00 Registrations
10:00 Official training starts
13:00 End of training / Lunch and car inspections
14:30 Qualification Race
15:30 Qualification Results
16:00 End of the event
Location of the event at PHELMA Minatec
Auditorium A102 and A103 for both training on 14-Mar and race on 15-Mar
Adress : 3, Parvis Louis Néel à Grenoble - Reception phone number = +33.04.56.52.91.00
Recommended accommodations (source PHELMA):

Hôtel Ibis
http://www.accorhotels.com/fr/hotel-2737-ibis-grenoble-gare/index.shtml
Tél : 04 76 86 68 68

Hôtel des Alpes
www.hotel-des-alpes.fr
Tél : 04 76 87 00 71

Hôtel Institut
http://www.institut-hotel.fr/
Tél : 04 76 46 36 44

Hôtel Suisse et Bordeaux
http://www.hotel-sb-grenoble.com/
Tél : 04 76 47 55 87

Hôtel Novotel Grenoble Centre
http://www.accorhotels.com/fr/hotel-1624-novotel-grenoble-centre/index.shtml
Tél : 04 76 70 84 84
Suggested Parking locations (source PHELMA):
- By the central bus station (parking fees apply)
- Parking "Le Doyen" in Ave. Doyen Louis Weil, in the Minatec area (parking fees apply)
Students are to supply their own lunch during the qualification event unless stated otherwise
PHELMA's address and location can be found the following link Google Maps  
Tags (3)
0 Kudos
1 Solution
721 Views
CommunityBot
Community Manager
This an automatic process.

We are marking this discussion as solved, due to a migration of a new community platform.
If you have additional questions, please create a new post and reference to this closed thread.

NXP Community!

View solution in original post

0 Kudos
1 Reply
722 Views
CommunityBot
Community Manager
This an automatic process.

We are marking this discussion as solved, due to a migration of a new community platform.
If you have additional questions, please create a new post and reference to this closed thread.

NXP Community!
0 Kudos