MPX4250AP - V1, V2 and Vex

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MPX4250AP - V1, V2 and Vex

Jump to solution
1,009 Views
adamparker
Contributor I

I have a MPX4250AP and I was looking at the technical document.  In there it mentions V1, V2 and Vex for this casing but makes no mention as to functionality.  What are these pins?

Thanks

Labels (1)
0 Kudos
1 Solution
624 Views
TomasVaverka
NXP TechSupport
NXP TechSupport

Hello Adam,

V1, V2 and Vex pins are used for factory trimming and we recommend to leave these pins unconnected. You will require only pin #1 (Vout), pin #2 (Ground) and pin #3 (Vs) as shown in figure 1 of the data sheet.


Regards,

Tomas


PS: If my answer helps to solve your question, please mark it as "Correct" or “Helpful”. Thank you.

View solution in original post

0 Kudos
1 Reply
625 Views
TomasVaverka
NXP TechSupport
NXP TechSupport

Hello Adam,

V1, V2 and Vex pins are used for factory trimming and we recommend to leave these pins unconnected. You will require only pin #1 (Vout), pin #2 (Ground) and pin #3 (Vs) as shown in figure 1 of the data sheet.


Regards,

Tomas


PS: If my answer helps to solve your question, please mark it as "Correct" or “Helpful”. Thank you.

0 Kudos