MMA8652 Z-axis stiction failure

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MMA8652 Z-axis stiction failure

757 Views
wiputpong_k
Contributor I

Hi,

We are using MMA8652FCR1 in our wearable product and we have just known that this sensor has ever had a quality problem that Z-axis is stuck at positive (0x7FF0) or negative (0x8000) railed output as discussion in https://community.nxp.com/message/611204.

However, It seem there are some design improvements to eliminate this failure since 2013 as the mention in PCN15581

Recently we found this issue in our product and we are checking with our production team that which manufacturing date/year of the issue MMA8652FCR1.

For my question, I would like to know that whether the current/new production lot of MMA8652 still have this issue and Can I still be confident to use this sensor in my product?

Thank yo very much.

Wiputpong

Labels (1)
0 Kudos
2 Replies

587 Views
TomasVaverka
NXP TechSupport
NXP TechSupport

Hi Wiputpong,

I would suggest to create a standard case as this type of information need to be provided by NXP Quality team.

Best regards,

Tomas

0 Kudos

587 Views
wiputpong_k
Contributor I

Thank you Tomas.

I will create a stand case for my question in Support Request.

0 Kudos