DS 3.6.0 MU Error

[darknite2023]

Hi.

I am running DS3.6.0 with all RTD 5.0.0 + 5.0.0 P08 SDKs installed and running into an issue when trying to build with support for HSE. I have copied over the necessary HSE files from C:\NXP\HSE_FW_S32K344_0_2_55_0\hse_ab_swap\interface and when I try to build, I get the following error:

I have searched the SDK and it is not clear where to find this file. Any suggestions on how to resolve this would be greatly appreciated. Thanks in advance.

[darknite2023]

Peripheral configuration is as follows:

[darknite2023]

Hi.

After some searching, I found the missing file in SEC_CRYPTO/Crypto_43_HSE_TS_T40D34M50I0R0/include directory. So, in addition to copying the HSE FW version dependent include files, do I also need to copy the include files from SEC_CRYPTO/Crypto_43_HSE_TS_T4XXX/include directory into my project for Non AutoSAR versions?

[Robin_Shen]

A colleague from the SW team told me: It's a known bug and the workaround will be to add Crypto_43_HSE in your configuration.

[Robin_Shen · Accepted solution]

Hi

Sorry for the inconvenience we bring you!
The 3 Known Issues for 5.0.0 P08 section of SW32K3_S32M27x_RTD_R21-11_5.0.0_D2410_ReleaseNotes.pdf mentioned：
ARTD-177531 Bug [SECRDR_S32K3][BLN_PB_S32K3XX_R202503] Missing Mu_Ip_Mask.h when using only Hse component S32DS

I noticed that in addition to adding the Hse component to Drivers, the Hse_Ip_AesEncAsyncIrq example also adds the MCAL component Crypto_43_HSE.

I have asked the software team about this issue and will let you know once I get a response.

Best Regards,
Robin

[darknite2023]

Thanks.