MPC8280 SDRAM 60x Bus按顺序写出错

[lhb_will]

在外面集成了两块SDRAM，型号是MT48LC4M32B2-。但是按照顺序向0地址写0x00000000,1地址写0x11111111,2地址写0x22222222，3地址写0x33333333,4地址写0x4444444,以此类推，数据写到0xffffffff后重新写入数据0x00000000.

但是SDRAM的数据写完后成如下状况，地址里的数据和预期的不一致。请问可能是哪里的原因？

[Pavel]

Perhaps some address lines are short-circuited on your board.

Have a great day,
Pavel Chubakov

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------