PF8200D2 power up question

[m_c]

In chapter 5 of PF8200D2 configuration report <https://www.nxp.com/docs/en/supporting-information/R_PF8200D2.PDF>.

It shows SW7/LDO1~4/PGOOD are OFF when power up.

Is that means LDO1~4 are keep OFF when PF8200 power up.

After RESETBMCU, MCU(S32V) will setup LDO1~4 output voltage by i2c.

[guoweisun · Accepted solution]

Hi

You have correct understanding about this topic!