mc9s12xet256mal

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

mc9s12xet256mal

1,337 Views
djoudi
Contributor I

hy i bought 10pcs of new original "mc9s12xet256mal" 

i have read "mc9s12xet256mal" in my LPG ecu with xprog "bdm connection" without any problem but when i change it with new "mc9s12xet256mal" i cant read the new one and xprog give message "no bdm connection "

i checked all of possibility vcc,gnd,bkgd,reset.    
and trying with another xprog,mcu,and pc give me the same problem

but when i try with first mcu its okay read,write,erase...
the problem just with new mcu 

please give me difference bitween old and new mcu 
and how to solve the problem 

 

0 Kudos
Reply
1 Reply

1,326 Views
StanoA
NXP TechSupport
NXP TechSupport

Hi Djoudi,

The type and mask set looks as original part. It could be caused by secured chip.

Please refer to solution of our colleague on web:

https://community.nxp.com/t5/S12-MagniV-Microcontrollers/Erasing-a-secured-S12XD-device-via-BDM/m-p/...

and:

https://community.nxp.com/t5/S12-MagniV-Microcontrollers/S12-X-MCU-Security/ta-p/1111118

I hope it could help you to solve your issue.

Best Regards,

Stano.

0 Kudos
Reply